06-11-2021 08:42 AM - edited 07-05-2021 01:26 PM
Hello,
Can someone point in the direction to migrate from 5508 to 8540 WLC? Best practice? Steps to complete the migration? I have them both up and online. I am needing assistance on how to migrate our 300+APs over to the 8540. Also anything on using DNA if possible.
06-11-2021 09:55 AM
Do you have Prime ?
check the compatability with new controller and AP matrix.
From WLC config (if you dont have Prime) go to Controller config, change the primary controller as new one.)
06-11-2021 10:29 AM
Thank you for the reply. I do have Prime and it is compatible.
06-11-2021 11:23 AM
then create a Template and move the AP to the new WLC, for testing take 2-5 AP Move to the new WLC and test it al working as expected. then move the rest of them, Leave OLD WLC for a week or 2 before removing from the Live network, in case if you hit a major issue you can roll back.
06-11-2021 11:26 AM
Awesome will check this out now and let you know how it goes. Truly appreciate it.
06-15-2021 12:34 PM
Will you elaborate on the steps to complete this? Prime template is not intuitive. Nor bringing up the new WLC. Licensing? APs connecting? Configurations from the old WLC to the new one?
06-11-2021 07:51 PM
I really hope you haven't purchased the 8540 yet.
06-15-2021 12:32 PM
Why do you say that? What do you recommend?
06-16-2021 12:52 AM
@SNGreene wrote:
Why do you say that? What do you recommend?
Cisco has announced the EoS/EoL for the 8540 back in January 2021 (LINK).
Aside from 8.10MR6 (which will be released in a few weeks) there will be one (maybe two), top, firmware release and then no more.
Buying the 8540 now is a waste of money.
The 5520/8540 will be replaced by the 9800.
Cisco Promo: 50% off Catalyst 9800 Series Wireless Controllers
06-17-2021 04:50 AM
Thank you for the insight. I'm tracking the EOL and EOS for the 5508 and 8540. We have already purchased the 8540s and have them partially up. We're putting together a migration plan to upgrade the hardware in phases. Since we already have the 8540s we're going to use them until the plan is formalized and budget approved for the 9800s. So I'm in need understanding how to accomplished both phases. 5508 to the 8540s. Then how to migrate from the 8540s to the 9800s, which may not do since the 9120 APs have WLCs embedded in them.
06-14-2021 01:24 PM
Are there any resources I refer to that will walk through using the template? I have created the template and it is not intuitive on the process. I could really use a step by step walk through on this process.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide