WLC4404 & WLC5508

[bm_5789]

A question for the community:  I currently have three(3) 4404 controllers in production.  We'll call them controller A, B & C.  When I install a brand new access point, it will always join controller A.  I'm unable to find where this is set in the controllers.  I will be installing two(2) 5508 controllers and eventually phase out the 4404's.  So I will want to know how to configure the new 5508's.  TIA

[Leo Laohoo]

When I install a brand new access point, it will always join controller A.

Most likely your DHCP server has an option (Option 43) for all APs to join WLC A.

DHCP OPTION 43 for Lightweight Cisco Aironet Access Points Configuration Example

[Surendra BG]

DHCP option 43 OR AP failover priority.. here are the links..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml

Lemme know is this answered ur question and please dont forget to rate the usefull posts!!

Regards

Surendra