Hello,
I have one wlan with lots of Cisco AP1121G (IOS 12.2(15)JA). The wireless clients authentication in based in Radius Server (Radiator) using 802.1x with EAP-TTLS.
For infraestructure management i have the WLSE Appliance (WLSE-2.7u firmware).
To take advantage of all "Radio Manager" capabilities of WLSE, i need to have one or more WDS in the wlan.
I configured one AP for primary WDS, with this commands:
wlccp authentication-server infrastructure wds_authentication
wlccp wds priority 255 interface BVI1
!
wlccp ap username xxx@xxx password 7 111111111111
wlccp wnm ip address 172.29.0.250
To other APs authenticate in primary WDS, I make this:
wlccp ap username xxx@xxx password 7 111111111111
When i do this in the APs, all is ok for WLSE: the AP is registered with a managed WDS.
So, the problem is: when the AP registers in the WDS, the wireless clients can't authenticate in the WLAN!
The APs use LEAP for infraestructure authentication and wireless clients use EAP-TTLS.
Someone can help me to solve this problem?
Thanks and Best Regards,
Nuno.
