cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1105
Views
0
Helpful
5
Replies

WLSE failed to authenticate with WDS

KUMAident
Level 1
Level 1

Hello

My Configuration is:

15 AP(1240AG 12.4(10b)JA ) 1x WLSE-1.1-HW (2.15.1u).

One of the 15 AP is the local radius and the wds.

Wds and radius works fine. All AP registered in wds.

My Problem:

After upgrade the wlse of version 2.15.1u the WLSE does not authenticate to the wds (wds message = NOT AUTHENTICATED; wlse message = WLSE failed to authenticate with WDS).

I have the local radius and wds AP new configured.

But the Faults are the same.

I have the WLSE reboot and in the console force to load the "CiscoBreR" than i do "erase config" and after reboot "setup config".

But the fault are the same.

What can be the problem ?

Fred

5 Replies 5

amritpatek
Level 6
Level 6