cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

WLSE to WCS upgrade path

sionjones
Beginner
Beginner

Hi,

Could anybody tell me if they are aware of an upgrade path from WLSE to WCS using existing WLSE hardware? Can anybody point out the main benefits/features moving to WCS from WLSE?

Many thanks

SJ

10 REPLIES 10

ciscosite11
Beginner
Beginner

What did you find out...need to do the same

Thnks GE

WLSE is not dead.

This is for customers who are migrating to controller based architecture and now have a WLSE box that they don?t know what to do with.

This SKU family supports only CiscoWorks WLSE hardware model 1130-19. To find the model number of a CiscoWorks WLSE, look at the compliance label on the bottom of the chassis front bezel. Only CiscoWorks WLSE with a compliance label that says 1130-19 can be converted to Cisco WCS.

Here is a link http://www.cisco.com/en/US/products/sw/cscowork/ps3915/prod_bulletin0900aecd804b4635.html

GGG

This post is old, but I had a question on the topic.

I went through the WLSE-WCS conversion doc and found that WLSE must be 1130-19. I can see from the software that my WLSE is 1130, but at some point the front bezel was removed. Is there any other way to find the model?

Thanks,

Jeff

Rob Huffman
Hall of Fame Community Legend Hall of Fame Community Legend
Hall of Fame Community Legend

Hi Jeff,

Did you try this?

Q. How can I get information about the WLSE's operating system and hardware?

A. For information about the operating system, WLSE model name, CPU and disk capacity, run the show version CLI command. For other information about the hardware, see the Technical Specifications appendix in the Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine.

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/prod_troubleshooting_guide_chapter09186a0080363fa7.html#wp1058183

Hope this helps!

Rob