WS-C3650-48PD-E\WS-C3850-48P-E as Wireless capability

[Sandeep Gupta]

Hello 

I need to use 

WS-C3650-48PD-E

WS-C3850-48P-E

as WLC capability and to configure them as foreign and anchor . I tried to find GUI based doc to take reference.

Please share any GUI based document to configure it as foreign & anchor?

[Prakash Parvathala]

Check these links ,

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70mobil.html#wp1093741

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010010100.pdf

[Prakash Parvathala]

Apologies for not given complete solution as C3650 will not support for Anchor configuration , it can be configured as foreign. for more information as per the relase notes of this switch latest IOS

    The following features are not supported in Cisco IOS XE Release 3.3.0SE:

– Outdoor Access Points

– Mesh, FlexConnect, and Office Extend Access Point deployment

– Wireless Guest Anchor Controller (The Catalyst 3850 switch can be configured as a foreign controller.)