03-09-2017 06:24 AM
Interface on SFP-10G-ZR status down plug on A9K-24x10GE-TR Line Card which install on ASR9910 (A9K-RSP440-SE) . But interface on SFP-10G-LR status up plug on A9K-24x10GE-TR same Line Card and I can check status by command 'show controllers tenGigEX/X/X/X phy'. I am unsure that is BUG. Follow show logging attached file.
03-12-2017 09:51 PM
It is listed as compatible. Is this a Cisco SFP+?
The only other thing I can think of is that the version of software you are running does not support it.
03-13-2017 12:29 PM
hi!
also have a look at this document:
there are some restrictions with the high powered optics in certain chassis given a particular fan type tray you may have (and bound to release).
there are some overrides possible, but you want to be careful with that otherwise you'll make the router a toaster :)
to check whether the type is recognized use: show controller teng<intf> int.
it shows whether the pluggable is compliant/recognized etc.
Example:
RP/0/RP0/CPU0:ASR9922#show controllers tenGigE0/5/0/0 int | i Plug
Mon Mar 13 15:28:43.234 EDT
Pluggable Present : yes
Pluggable Type : SFP-10G-LR
Pluggable PID : SFP-10G-LR
Pluggable Compl. : Compliant
Pluggable Type Supp.: Supported
Pluggable PID Supp. : Supported
Overrides are: tranceiver permit pid all interface command and global config service unsupport-transceiver.
cheers
xander
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide