02-26-2021 05:19 AM
On ASR-9904 Chassis with RSP5-SE. I was under the impression that the RSP - Chassis combo could support 1.8T per line card. However, when a A9K-8X100GE-TR is inserted, I get RATE LIMITED message.
%FABRIC-FIA-1-RATE_LIMITER_ON : Set|fialc[4762]|0x108b000|Insufficient fabric capacity for card types in use - FIA egress rate limiter applied
Shouldn't the RSP5-SE be able to support the bandwidth of 800G card?
Solved! Go to Solution.
02-26-2021 05:33 AM
Hi PK99,
the higher bandwidth is when we have lightspeed cards + RSP5
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2019/pdf/BRKARC-2003.pdf
slide 19 covers the difference.
as you have a tomahawk based line card, the throughput with a single RSP5 will be lower since RSP 430 per slot, dual 860 per slot
02-26-2021 05:33 AM
Hi PK99,
the higher bandwidth is when we have lightspeed cards + RSP5
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2019/pdf/BRKARC-2003.pdf
slide 19 covers the difference.
as you have a tomahawk based line card, the throughput with a single RSP5 will be lower since RSP 430 per slot, dual 860 per slot
02-26-2021 12:36 PM
Thank you Tarik! This pdf helps a ton. I guess with Gen 4 cards the RSP5 will do 900G per slot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide