cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1068
Views
0
Helpful
1
Replies

A9K-ISM-100 with A9K-RSP440-SE on 6.2.3 ??

Adam Vitkovsky
Level 3
Level 3

Hi gents,

 

I got the following when inserted ISM module into ASR9k the other day, would you know what is it complaining about?

This line card does not use NPs, and is neither Trident-based nor Typhoon-based so should not complain about too new XR version.

And the mixed mem note can be ignored.

 

The system is running 6.2.3

 

Node            Type                      State            Config State

----------------------------------------------------------------------------

-

0/RSP0/CPU0     A9K-RSP440-SE(Active)     IOS XR RUN       PWR,NSHUT,MON

0/RSP1/CPU0     A9K-RSP440-SE(Standby)    IOS XR RUN       PWR,NSHUT,MON

0/0/CPU0        A9K-36x10GE-TR            IOS XR RUN       PWR,NSHUT,MON

0/4/CPU0        A9K-ISM-100(LCP)          IN-RESET         PWR,NSHUT,MON

0/7/CPU0        A9K-36x10GE-TR            IOS XR RUN       PWR,NSHUT,MON

 

 

RP/0/RSP0/CPU0:Nov 12 18:04:23.838 : shelfmgr[420]:

%PLATFORM-SHELFMGR_HAL-7-CAN_INFO : Can API: slot 6 online event.

RP/0/RSP0/CPU0:Nov 12 18:04:23.846 : shelfmgr[420]:

%PLATFORM-SHELFMGR-3-INCOMPATIBLE_LC_FOR_CHASSIS : Node 0/4/CPU0 has an incompatible card_type of 0x1000305 for this chassis/RSP type/FC.

RP/0/RSP0/CPU0:Nov 12 18:04:23.848 : shelfmgr[420]:

%PLATFORM-SHELFMGR-3-MIXED_MEMORY_POWERED : Node 0/4/CPU0 is powered, system running mixed line card memory mode RP/0/RSP0/CPU0:Nov 12 18:04:23.848 : shelfmgr[420]:

%PLATFORM-SHELFMGR-3-MIXED_MEMORY_ALARM : System enters mixed line card memory mode RP/0/RSP0/CPU0:Nov 12 18:04:23.849 : shelfmgr[420]:

%PLATFORM-SHELFMGR-6-NODE_STATE_CHANGE : 0/4/CPU0 A9K-ISM-100 state:IN-RESET

 

RP/0/RSP0/CPU0:Nov 12 18:04:23.857 : invmgr[261]: %PLATFORM-INV-6-OIRIN :

OIR: Node 0/4/CPU0 Sn: FOC1832NFHW inserted RP/0/RSP0/CPU0:Nov 12 18:05:09.015 : ce_switch_srv[54]:

%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is up RP/0/RSP1/CPU0:Nov 12 18:05:09.186 : ce_switch_srv[54]:

%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is up RP/0/RSP0/CPU0:Nov 12 18:05:10.157 : ce_switch_srv[54]:

%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is down RP/0/RSP0/CPU0:Nov 12 18:05:10.444 : ce_switch_srv[54]:

%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is up

 

Any pointers are very much appreciated

 

adam

 

netconsultings.com

::carrier-class solutions for the telecommunications industry::

 

 

adam
1 Reply 1

tkarnani
Cisco Employee
Cisco Employee

Hi Adam,

 

unfortunately the last release that supports the ISM module is 5.3.3

 

https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/eos-eol-notice-c51-734174.html

 

you will either need to downgrade or replace it with the VSM module

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: