Hello,
I have a N7k with 40G ports that needs to be connected with 10G mainly to ASR920 and ASR9001.
Using the breakout cable QSFP-4X10G-AOC results in interface down (ASR9k reports LOS).
The cable is not listed as compatible for ASR9001 nor AR920 (as the SFP+ module) in SFP+ compatibility matrix and "service unsupported-transceiver" doesn't do it's magic.
Have you managed to use this cable outside of Nexus ecosystem?
Thanks, kind regards,
Eduard
RP/0/RSP0/CPU0:R9-ASR9k1#show control tenGigE 0/0/2/0 phy
Mon May 9 06:45:46.866 UTC
PHY data for interface: TenGigE0/0/2/0
SFP EEPROM port: 0
Xcvr Type: SFP
Xcvr Code: SFP-H10GB-ACU7M
Encoding: not specified
Bit Rate: 10300 Mbps
Vendor Name: CISCO-AVAGO
Vendor OUI: 00.17.6a
Vendor Part Number: AFBR-7IER07Z-CS1 (rev.: 01 )
Laser wavelength: 3072 nm (fraction: 0.00 nm)
Optional SFP Signal: Tx_Disable, LOS
Vendor Serial Number: AVE1948XXXX-CH2
Date Code (yy/mm/dd): 15/11/24 lot code:
Diagnostic Monitoring:
Enhanced Options: None
