ASR 9000 4.2.1 l2tp vpdn config migration

[Umit AYDINLI]

Hi,

I had a Cisco 7206VXR G2. I used to use vpn l2tp on the router. 7206 config are below:

!

vpdn-group pppoe_customer

description ***** redback *****

accept-dialin

  protocol l2tp

  virtual-template 10

terminate-from hostname 192.168.96.149

source-ip 192.168.96.4

local name 192.168.96.4

lcp renegotiation always

l2tp tunnel password 0 ericsson

l2tp tunnel timeout setup 3600

ip mtu adjust

!

How to migrate or apply on ASR 9000 this config?

[smehrnia]

Hi,

since there are different approaches and options to consider due to the nature of the ASR9K and IOS XR, I suggest you read this documentation and decide how to do the config based on your knowledge of the network you have.

http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.2/bng/configuration/guide/b_bng_cg42asr9k.pdf

plz Rate if it helped,

Soroush.

[Umit AYDINLI]

Thank you kind of help.

I have just read this document (so I read before this document). But I didn't see the LAC or LNS role example config or road map for ASR or XR.

I want to need LAC or LNS role example config or configrations guide.