06-14-2012 06:34 AM
Hi,
I had a Cisco 7206VXR G2. I used to use vpn l2tp on the router. 7206 config are below:
!
vpdn-group pppoe_customer
description ***** redback *****
accept-dialin
protocol l2tp
virtual-template 10
terminate-from hostname 192.168.96.149
source-ip 192.168.96.4
local name 192.168.96.4
lcp renegotiation always
l2tp tunnel password 0 ericsson
l2tp tunnel timeout setup 3600
ip mtu adjust
!
How to migrate or apply on ASR 9000 this config?
06-19-2012 05:38 PM
Hi,
since there are different approaches and options to consider due to the nature of the ASR9K and IOS XR, I suggest you read this documentation and decide how to do the config based on your knowledge of the network you have.
plz Rate if it helped,
Soroush.
06-19-2012 11:00 PM
Thank you kind of help.
I have just read this document (so I read before this document). But I didn't see the LAC or LNS role example config or road map for ASR or XR.
I want to need LAC or LNS role example config or configrations guide.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: