Hi,
Cisco ASR9001
we got аn error when try to upgrade from 6.3.3 to 6.7.3;
install operation 42* from the Logfile.
then tried to upgrade from Version 6.5.3 to 6.7.3 but no go - Install operation 43 and 49
can you suggest where we did mistake ?
here a cut from the log and attached show install log detail:
RP/0/RSP0/CPU0:111(admin)#install add tar
> disk1:ASR9K-iosxr-px-k9-6.7.3.ta$
> Sun Mar 14 09:18:01.143 MET
> Install operation 42 '(admin) install add tar
> /disk1:ASR9K-iosxr-px-k9-6.7.3.tar activate synchronous' started by user
> 'admin' via CLI at 09:18:01 MET Sun Mar 14 2021.
> Info: The following files were extracted from the tar file
> Info: '/disk1:ASR9K-iosxr-px-k9-6.7.3.tar' and will be added to the
> entire
> Info: router:
> Info:
> Info: README-ASR9K-iosxr-px-k9-6.7.3.txt (skipped - not a pie)
> Info: asr9k-video-px.pie-6.7.3
> Info: asr9k-services-px.pie-6.7.3
> Info: asr9k-services-infra-px.pie-6.7.3
> Info: asr9k-optic-px.pie-6.7.3
> Info: asr9k-mpls-px.pie-6.7.3
> Info: asr9k-mini-px.pie-6.7.3
> Info: asr9k-mgbl-px.pie-6.7.3
> Info: asr9k-mcast-px.pie-6.7.3
> Info: asr9k-li-px.pie-6.7.3
> Info: asr9k-k9sec-px.pie-6.7.3
> Info: asr9k-fpd-px.pie-6.7.3
> Info: asr9k-doc-px.pie-6.7.3
> Info: asr9k-bng-px.pie-6.7.3
> Info: asr9k-asr9000v-nV-px.pie-6.7.3
> Info:
> Part 1 of 2 (add software): Started
> / 1% complete: The operation can still be aborted (ctrl-c for options)
> Error : Uncompression of the image failed.
> invalid compressed data--format violated
> RP/0/RSP0/CPU0:Mar 14 09:25:33.931 MET: instdir[262]:
> %INSTALL-INSTMGR-3-INSTALL_OPERATION_SYSTEM_ERROR_SPECIFIC_NODES_HDR :
> Error occurred during install operation 42: Please collect diagnostic
> information using 'show tech-support install'. Use 'show install log 42
> detail' for more details.
> Error: The install operation failed due to a system error.
> Error:
> Error: ERROR: Node responded with an error when completing the
> installation
> Error: of packages within the system. (Details: 'Package Library'
> detected
> Error: the 'fatal' condition 'can't uncompress pie archive')
> Error: AFFECTED NODE(S): 0/RSP0/CPU0
> Error: TECH SUPPORT:
> Error: Please collect diagnostic information using '(admin) show
> Error: tech-support install'
> | 1% complete: The operation can still be aborted (ctrl-c for
> options)RP/0/RSP0/CPU0:Mar 14 09:25:33.931 MET: instdir[262]:
> %INSTALL-INSTMGR-3-INSTALL_OPERATION_SYSTEM_ERROR_SPECIFIC_NODES :
> 0/RSP0/CPU0 (Node responded with an error when completing the
> installation of packages within the system. (Details: 'Package Library'
> detected the 'fatal' condition 'can't uncompress pie archive'))
> Error:
> Error: The following pies were not added due to an error:
> Error: asr9k-services-infra-px.pie-6.7.3
> Error: asr9k-optic-px.pie-6.7.3
> Error: asr9k-mpls-px.pie-6.7.3
> Error: asr9k-mini-px.pie-6.7.3
> Error: asr9k-mgbl-px.pie-6.7.3
> Error: asr9k-mcast-px.pie-6.7.3
> Error: asr9k-li-px.pie-6.7.3
> Error: asr9k-k9sec-px.pie-6.7.3
> Error: asr9k-fpd-px.pie-6.7.3
> Error: asr9k-doc-px.pie-6.7.3
> Error: asr9k-bng-px.pie-6.7.3
> Error: asr9k-asr9000v-nV-px.pie-6.7.3
> Part 1 of 2 (add software): Failed. Error information available as part of
> command output above. For more information see '(admin) show install log 42'
> Part 2 of 2 (activate software): Skipped due to failures in part 1
> - 10% complete: The operation can still be aborted (ctrl-c for
> options)RP/0/RSP0/CPU0:Mar 14 09:25:33.953 MET: instdir[262]:
> %INSTALL-INSTMGR-3-INSTALL_OPERATION_USER_ERROR : User error occurred
> during install operation 42. See 'show install log 42 detail' for more
> information.
> Install operation 42 failed at 09:25:34 MET Sun Mar 14 2021.
>
Regards
