Hello,
we have router asr9001, Use and PPPOE , our config is working fine ,and users is connected via PPPOE to router ,
but the value of NAS-PORT-ID is empty
RP/0/RSP0/CPU0:A9K-BNG-FTT#sh subscriber session filter username admin@ping detail
Sun Nov 20 20:34:46.169 Iraq
Interface: TenGigE0/0/1/0.1569.pppoe9055
Circuit ID: Unknown <<<<<<<<<<<<<<<<<<<<<<<<<<<<>
Remote ID: Unknown <<<<<<<<<<<<<<<<<<<<<<<<<<<<>
Type: PPPoE:PTA
IPv4 State: Up, Sun Nov 20 13:54:53 2022
IPv4 Address: 10.212.128.9, VRF: default
Mac Address: c4ad.34eb.8416
Account-Session Id: 047f9196
Nas-Port-id: unknown. <<<<<<<<<<<<<<<<<<<<<<<<<<<<>
Nas-Port: 2425357857
User name: admin@ping
Formatted User name: unknown
Client User name: unknown
Outer VLAN ID: 1569
Inner VLAN ID: 1600
Subscriber Label: 0x0408019e
Created: Sun Nov 20 13:54:52 2022
State: Activated
Authentication: authenticated
Authorization: unauthorized
Access-interface: TenGigE0/0/1/0.1569
Policy Executed:
policy-map type control subscriber PPPOE-CORE-SOFTLINK
event Session-Start match-first [at Sun Nov 20 13:54:52 2022]
class type control subscriber PPP do-until-failure [Succeeded]
10 activate dynamic-template PPPOE-CORE-SOFTLINK [Succeeded]
event Session-Activate match-first [at Sun Nov 20 13:54:52 2022]
class type control subscriber PPP do-until-failure [Succeeded]
10 authenticate aaa list default [Succeeded]
Session Accounting:
Acct-Session-Id: 047f9196
Method-list: default
Accounting started: Sun Nov 20 13:54:58 2022
Interim accounting: On, interval 1 mins
Last successful update: Sun Nov 20 20:33:58 2022
Next update in: 00:00:12 (dhms)
Last COA request received: unavailable
[Last IPv6 down]
Disconnect Reason:
my config
aaa attribute format NAS_PORT_FORMAT
circuit-id plus remote-id separator .
!
aaa radius attribute nas-port format e SSAAPPPPQQQQQQQQQQVVVVVVVVVVVVVV
aaa radius attribute nas-port-id format NAS_PORT_FORMAT
aaa radius attribute calling-station-id format MAC_RADIUS
