cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7625
Views
0
Helpful
3
Replies

ASR9K - 'show inventory'

Pedro Morais
Level 1
Level 1

Hello All,

The 'show inventory' of an ASR9010 shows the details of some XFPs that was removed:

RP/0/RSP0/CPU0:ASR9k#sh inventory

(…)

NAME: "module 0/0/CPU0", DESCR: "4-Port 10GE Line Card, Requires XFPs"

PID: A9K-4T-B          , VID: V05, SN: 1234567890

NAME: "module mau TenGigE0/0/CPU0/0", DESCR: "Multirate 10GBASE-LR and OC-192/STM-64 SR-1 XFP, SMF"

PID: XFP-10GLR-OC192SR  , VID: V03 , SN: 1234567890

NAME: "module mau TenGigE0/0/CPU0/1", DESCR: "Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP, SMF"

PID: XFP-10GER-192IR+   , VID: V01 , SN: 1234567890

NAME: "module mau TenGigE0/0/CPU0/2", DESCR: "Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP, SMF"

PID: XFP-10GER-192IR+   , VID: V01 , SN: 1234567890

NAME: "module mau TenGigE0/0/CPU0/3", DESCR: "Multirate 10GBASE-ZR and OC-192/STM-64 IR-2 XFP, SMF"

PID: XFP-10GZR-OC192LR  , VID: V03 , SN: 1234567890

(…)

RP/0/RSP0/CPU0:ASR9k#sh controllers Te0/0/0/2 phy

Mon Feb 20 16:55:21.989 UTC

XFP #2 is not present

RP/0/RSP0/CPU0:ASR9k#sh controllers Te0/0/0/3 phy

Mon Feb 20 16:55:25.090 UTC

XFP #3 is not present


Is this the normal behavior? Any idea?

Thanks!!!

Regards,

Pedro

1 Accepted Solution

Accepted Solutions

Vadim Zhovtanyuk
Cisco Employee
Cisco Employee

Hi Pedro,

no it is not normal behavior

Could you pleaase open the TAC case and attach the

-sh inventory

-sh instal active summary

-admin show inventory

-admin show diag detail

-sh log

I would say "invmgr" process doesn't work as expected and restart of this process may help but it is necesary to have everything documented in TAC case

wbr

/vadim

View solution in original post

3 Replies 3

Vadim Zhovtanyuk
Cisco Employee
Cisco Employee

Hi Pedro,

no it is not normal behavior

Could you pleaase open the TAC case and attach the

-sh inventory

-sh instal active summary

-admin show inventory

-admin show diag detail

-sh log

I would say "invmgr" process doesn't work as expected and restart of this process may help but it is necesary to have everything documented in TAC case

wbr

/vadim

Vadim Zhovtanyuk
Cisco Employee
Cisco Employee

Hi Pedro,

Also verfy the XFP is really being removed

wbr

/vadim

Hi Vadim,

I'll open the TAC SR.

Thanks for your help.

Regards,

Pedro

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: