XR OS and Platforms

Update - Wednesday Dec 23rd: The 5.3.3.24i pre-release pies for ASR9000 platform were posted to file exchange: URL: https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=IOS-XRForum:  "ASR9k 533 24i Interim Image" All of you who already had ...

Dear all, Recently, we try to install a A9K-MOD80-TR module but the module always in A9K-MOD80-TR state:MBI-BOOTING mode. RP/0/RSP0/CPU0:Nov 19 11:00:58.314 MYT: tempo[425]: Card Inserted 0/6/CPU0RP/0/RSP1/CPU0:Nov 19 11:00:58.318 MYT: tempo[425]: ...

On our ASR9010 router I maked dhcp proxy for subscribers, and it worked untill software upgrade (from 4.3.2 to 5.2.4).After upgrade most of subscribers received IP addresses, but some of them did not. All subscribers are getting their IP statically b...

Hi, I'm running dual stack IPoE BNG on ASR9010 5.3.2. IPv4 subscribers are fine, but there is an issue with IPv6. Both IPv4 and IPv6 sessions are up, but there is no connectivity via IPv6. BNG cannot ping subscriber's connected address, as well as s...

Dears,I got a question about the show ip route output on XR OS:#sh ip route 1.0.0.0/24Fri Oct 30 07:17:21.049 GMTRouting entry for 1.0.0.0/24  Known via "bgp 4134", distance 200, metric 0  Tag 6453, type internal  Installed Sep  3 17:07:13.965 for 8w...

I have configured HSRP on the two RSP MgmtEth interfaces so I can manage the router from the same IP address regardless of the active RSP: router hsrp  interface MgmtEth0/RSP0/CPU0/0    address-family ipv4      hsrp 1 version 1        timers 1 3     ...

has anyone seen this issue; sp7 file showing active and inactive both at the same time? RP/0/RSP0/CPU0:ASR9K(admin)#show install summary Tue Nov 17 01:09:32.084 ESTDefault Profile: SDRs: Owner Active Packages: disk0:asr9k-k9sec-px-5.1.3 disk0:asr9k-...

hi all,  Could someone please share cisco XR version as-path set configuration exmaple for define private as range 64512-65534 and 32bit Private ASN 4200000000-4294967294 ? how to make ios-regex for them ?  thanks in advance ! Eric 

Hi, I need to get "show arp" from BVI interface via snmp, cant find mib - if exist. IOS XR ver 4.2.3 regards,

I am having trouble establishing a neighbor on my ASR9006 with a Brocade device and cannot find any information on what I am seeing in the debug output. Can anyone tell me what the following messages are indicating? This is the only ouput I get from ...

LAN<---------> router1 gi 2/9 < -------- Ethernet link ( interface configured " isis network point-to-point" )--------> gi 1/1 Router2<-------->LAN interface GigabitEthernet2/9 no switchport ip address 15.1.1.2 255.255.255.0 ip router isis 1 isis ne...

Hey ! Since you can´t download IOS XR 4.3.4 Service Pack 8 for ASR9K anymore i wonder why it was taken down from the download-section. Are there any problems i should be aware of ? I have several boxes running 4.3.4-SP8 ... Cheers, David

hi all,  we would like change our TACACS access path from global RT into VRF RT, but we are failed for access TACACS server as shown below error message. ~~~~~~~~~~~~~~~ tacacs/tacacs_lt 0/RSP0/CPU0 t10 No appropriate server found - 'TACACS' detected...