XR OS and Platforms

Hello, i have a problem with implementing MPLS L3 VPN in ASR 9006. The BGP neighbors in the VRF remain in the idle state. This is my VRF and BGP configuration on both PE routers:RP/0/RSP0/CPU0:GW_SDG#sho run vrf vrf TEST address-family ipv4 unicast!R...

Hi,I just installed some XRv 5.3.1's on my ESXi box (through the .ova file). They install and boot fine, but after a while they segfault and reloads as a consequence. I have tried manually increasing the memory available, but it still happens. Am i m...

I have a customer who has a bunch of 100mb copper devices.  They cheaped out and bought a bunch of non-Cisco optics that are not working with the 100mb devices (no link).My question - what is the Cisco part number for a 100/1000mb copper SFP that wil...

 http://www.cisco.com/c/en/us/products/collateral/routers/crs-1-16-slot-single-shelf-system/product_data_sheet09186a008022d5f3.html Thank you very much.

Hi.I'm having problems with the vrf license in ios-xr. I have installed the 6 VRF licenses. But when I show the admin show license, I just see total license is 2.Some outputs from the router:install licenseInfo: License add successful for feature(s):...

hi, CSC: I'm looking for FIPS support on an NCS6000. I've found in configuration guides for both CRS and ASR9k that it is in fact supported by XR in both platforms, but no mention of it for the NCS6000. Can anyone confirm this in either direction? Th...

I'm having trouble installing CSM 2.0 on a Windows 8 computer.  I tried running the normal setup script, and that failed, so I tried running it manually at the command line, and it fails with the same error but a little more debugging information (se...

It appears there's no ability to make all interfaces passive by default in XR as there is in IOS.Is there a reason for this or is it just that it has not been included yet?Workaround is to configure all unnecessary interfaces as passive but I prefer ...

Is there a generic configuration example that I can use for reference on how to setup my BNG to receive RADIUS PoD and/or COA requests? Also, can someone tell me what attributes or information is required to be sent from the RADIUS server for this?