XR OS and Platforms

Hi all, did you know about bgp attribute-download : http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.2/routing/command/reference/rr32bgp.html#wp2809802this command "bgp attribute-download" is required to activate the netflow to include the as numbe...

Hi guys,I have the following configuration.Notice that I have the interface and peer bgp into shutdown.interface TenGigE0/6/0/0 ipv4 address 10.10.10.2 255.255.255.252 shutdown load-interval 30!RP/0/RP0/CPU0:CRS#sh run router bgp 34 neighbor 10.10.10...

Manigandan BWelcome to the Cisco Support Community Ask the Expert conversation. Learn from Cisco expert Manigandan B about the architecture, features, performance and benefits of Cisco ASR 1000 Series Routers. This event is a continuation of the Cis...

We are migrating an IOS based PE to ASR9K with XR4.2. Customer has a local policy-map to match SNMP, telnet packets generaing from router and set Precedence value 3. !ip access-list extended MGMT permit tcp any any eq telnet permit udp any any eq snm...

Hi, Now working in a new deployment of some ASR9010 at the edge (PE) of an SP network. Questions arise trying to choose the XR software version, Appreciate if anyone can help sharing experiences, and answering few questions.Is there a safe harbor pro...

Hi, we will have multicast running over the MPLS VPN with ASR 9K as PE, CRS as P. I checked the ASR 9K multicast configuration guide v4.0 but didn't find any info for multicast load balancing. I found some old threads said we have to use GRE tunnel f...

Hello all,When doing some tests using the ‘loopback line’ on a 10GbE interface in an ASR9000, we noticed that we don't have output rate, although the test device receive all the generated traffic back. The interface configuration is rather simple: RP...

Hi Expert,I cannot commit qos policy under bundle ethernet interface and got error message  'qos_ea' detected the 'fatal' condition 'Hw programming car entry failed'. Could it be bug CSCts66753. I use CRS1/ 4.0.1 Thanks