Inter-area EVPN & VPLS Interconnection configuration on AGGregation-PE
virtual vfi <evi-id>===============> also i want expert explain me this command ethernet-segment identifier type 0 <identifier_value>===========> this command is not cl...
Hello There,We have 2 MPLS PE routers RouterA and RouterB. RouterA has 10.0.0.0/8 in its routing table, and we do not want 10.0.0.0/8 to be exported to RouterB's routing table. to do that, we created route-policy on RouterA matching 10.0.0.0/8 prefix...
Hello
we work on Inter-area Multipoint EVPN-VPLS Interconnection : single active mode
so i have this scrpit in every A-PE :
L2vpn
bridge group <>
bridge domain <>
interface <type_number>.<vlan_id>
vfi
neighbor <A_PE02_loop_ip> pw-i...
Hello
I have router NCS540 cisco as a A-PE
p2p EVPN
interface <type_number>.<vlan_id>
neighbor evpn evi <evi_id > service <service_id======> what is the method can allocate <evi_id > service <service_id> for each service ??
Please I w...
Hello team,We have an eBGP peering between an ASR9K and Firewall in VRF.Do we need to install the VRF license to the slot with VRF Lite or with just one VRF instance on the ASR9K?Please advice. Thank you!
Hi everyone,
What is the difference between `matches-any` and `matches-within` in this context?
RP/0/RP0/CPU0:R6(config)#route-policy FOO
RP/0/RP0/CPU0:R6(config-rpl)#if community ?
is-empty Route has no BGP community attributes
length ...
Hello,We've bought NCS-57B1-5DSE-SYS with only 100G/400G interfaces. Because our old NCS-5501-SE has few 10G (CWDM and simple Single Mode) interfaces used, we decided to buy some CVR adapters (CVR-QSFP-SFP10G) for that case from quite trustable 3rd p...
Hi all, I run jumbo frame support test for our l2vpn xconnect service on Cisco ASR 9K platfrom, XR OS is kind of old as 3.9.2I setup AC interface under both end router sub-interface. 200, shown as below:testing IOS router 1 int gi0.200---- int gi0...
Hello,I'm quite old ios-xr user. But still i'm not sure if my thinking is correct. Is it true that line default also activates the same configuration for console even if line console is not configured ?For example i'm using this command to ensure th...
Hello
I have server-mapping in network segment routing in operator
i want tp know if server-mapping need a License to install or not ?
I wait a reply from expert segment routing cisco
Thanks in advance
Hello,So far we've been using NCS-5501-SE and the upgrade process was quite simple:It was like: install add source harddisk:/ ncs5500-mini-x-7.5.2.iso NCS5500-7.5.2-packages.tarinstall prepareinstall activate synchronousQuite simple and self explanat...
We've recently installed this device at the edge of our network to peer with 3 different providers. This has been working fine up until recently with the following errors. Are we hitting our limit for ipv4 routes? I cant find anything about this m...
Hello, community I see these strange (ungooglable) error logs on ASR-9010: RP/0/RSP1/CPU0:Aug 11 15:30:36.923 : canb-server[149]: %PLATFORM-CANB_SERVER-3-ALARM_INDICATION : Raise alarm from CBC in slot 0/FT1/SP, alarm code CBC_ALRM_SLOT_ID_CHANGED_RU...
Hi i have been trying to configure a diameter Gy Connection to our OCS platform but keep having these error.Appreciate if anyone would help. Here is my Diameter Config according to Cisco Doc. diameter gydiameter peer a.b.c.ddestination host a.b.c.dtr...
