Hello.
Running two ASR9006 with XR 6.1.4 SP5 in geo-red.
We have a bunch of customers using Avast antivirus software in their Windows PCs.
Avast seems to do some type of probing (not sure why, could not find any info), sending three DHCP discover...
Hi Guys, I am not able to SSH from my CRS router with code 5.3 to ASR9k router with code 6.2.3. I can telnet but can not SSH. I get below error on both routers' log. %SECURITY-SSHD-6-INFO_GENERAL : Enc name is NULL: client 3des-cbc server aes128-ctr,...
Hi again, We are currently testing a dual-stack setup on our BNG. IPv4 only is already productively running (XR 6.4.2). The BNG plays DHCP server for both protocols, an external radius server assigns the attributes (ip, mask, vrf, interface for ipv4...
Hello everyone.Recently switched to the ASR 9006 runing on IOS XR Version 6.4.2 and faced with bgp process crashing.Crashed pid:16695594 (pkg/bin/bgp) Time:Wed Mar 27 22:17:30 2019
Thread:21 received signal:11 - SIGSEGV. Segmentation fault. Sender:p...
Hey everyone, I hope someone can shed a light and help me to get this solved. We are running our BNG ASR-9001 version 6.4.2 with IPoE session and a remote radius and dhcp server. We are now trying to get rid of the external dhcp server and configure ...
Alex/Cisco,I am planning to install the A9K-MPA-8X10GE in ASR9k-MOD80 mother linecard and the box is running IOS-XR version 5.1.1. Curiously someone suggested to upgrade the SMU before installing the card above. I digged on Cisco forums and I am not ...
We are trying to implement automated BGP blackholing for our customers on our Cisco AS9000s, but I'm having some issues. When trying to squash traffic its not actually dropping. Basic network looks like this: Customer - Provider Edge - Privider back...
Hi all, I am trying in IOS XR to configure a bridge group with routed interface bvi and I am getting the following problem. 'VLAN MA' detected the 'warning' condition 'Layer 2 subinterfaces may not be transformed into Layer 3 ones and vice versa' co...
On an ASR9000 is it possible to configure L2VPN local switching using two separate sub-interfaces that are configured under the same main physical interface? i.e.: l2vpnxconnect group TESTp2p test-P2Pinterface TenGigE0/1/0/0.100interface TenGigE0/1/0...
I cannot add a subinterface on a port-channel on a asr920 I want to double tag vlan on an interface for my connection to my client. The LACP works fine but now i need double vlans on this interface. How does this work on ASR??? interface Port-channe...
I'm having trouble understanding why I would be seeing Storm Control drops on a VFI pseudowire under a l2vpn bridge domain. This is an ASR 9010 router running IOS XR version 5.3.3. From everything that I've read, Storm Control is unsupported for VFI ...
Hi all, I am having a problem to access the admin exec mode of an asr 9000 which runs 6.5.When I give the admin in exec mode it transfers me to RP/0/RSP1/CPU0:x1#adminadmin connected from 127.0.0.1 using console on x1sysadmin-vm:0_RSP0# exit Thanks i...
Hi, Does IOS XR platforms support EVPN VPWS single-active multihoming?If so, which Designated Forwarder (DF) election algorithms are supported for electing the Backup DF (BDF) to serve as the backup PE in the above scenario? Regards,Muthu
Looking to see if anybody has any information on a few commands in the NCS 540 admin command line. Can't find any documentation on them. The two commands are activate and devtools. Can anybody explain what additional commands/config and tools this wi...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
