Hello,I have a little doubt about EFP & QoS scale on -TR A9K linecard.I understood that -TR support a smaller amount of EFP per LC and ony 8 queues on the egress side but I'm a bit confused about policers.I'm planning to use ASR9K mainly for aggregat...
Forum Posts
Resolved! NAT IPv4 or CGN ROUTER ASR9k
Dears, I want to make NAT or CGN "IPv4" in the Router ASR 9k but I cannot. please help me how I make NAT? give me an example System image file is "bootflash:disk0/asr9k-os-mbi-5.1.2/0x100000/mbiasr9k-rp.vm" cisco ASR9K Series (P4040) proce...
Dear all, When leaking between vrf and Global "import from default-vrf & advertise-as-vpn", does the vrf definition needs to be reapplied for new changes to take effect ? I think not, however I am seeing an issue on 5.3.4, where changing CEF NH kil...
HI, I am testing a VPLS Inter-AS Option-B Setup for both, BGP and LDP signaling VPLS-VPNs. This is working between IOS-XE machines, but IOS-XR seems to lack the support for this. For LDP, ASR9k does not build any segmented PWs and for BGP there are n...
Resolved! Available Queues on Satellite ASR9000v
Hi, I'm a little bit confused about the available/usable queues on a Satellite ASR9000v. In a FAQ about the QoS offload topic two Cisco employees wrote this: A config guide chapter relating QoS offload, shows the following config which use the qos-g...
Hello Experts I have attempted to install the sp4 (asr9k-px-5.3.3.sp4.tar)for IOS XR 5.3.3 in AR9006 However the install fails with a message about the state of 0/RSP1/CPU0. Can I install the SP4 in spite of the status of 0/RSP1/CPU0? Thanks in adva...
Dear all,i have ASR902 log full of this masseges:Jun 12 12:05:49: %ISSU-0-SOFTWARE_INVALID: SIP0: periodic.sh: Package for location /tmp/sw/cc/1/5/cc_spa/: binary is missingJun 12 12:05:49: %ISSU-0-SOFTWARE_INVALID: SIP0: periodic.sh: Package for l...
Hi everyone, Is there a way to log all cli command without TACACS server on IOS-XR (like "archive config" in IOS/IOS-XE) ? I know that "show cli history detail" can print all command, but I wand to store them in log and to external syslog server. Th...
Dear colleagues, I have a trouble with eBGP multihop on cisco ASR 9k6 XR 6.4.2. Bgp session stuck in "Active" state. My conf is: router bgp 65535 vrf cache neighbor 10.1.0.40 remote-as 64536 ebgp-multihop 50 update-source Bundle-Ether2.37 a...
Resolved! NCS540 XR6.3 interface issues
Hi, We just receive a NCS 540 with IOS-XR 6.33 in our lab to do some preflight test before implementing in a customer and found an estrange issue that we want to know if is a normal behaviour. When we take out a transceiver from the 100G interface an...
Hi, I have got a question about the queuing structure on. On a Fabric Interface Asic (FIA) of an ASR9K resides 3 VOQs for each egress port on other line cards. ...but ONLY 3 VOQs... What if, when I have consistently structured my traffic into 8 cla...
Resolved! Upgrade 0/BPID0/SP Location
Hello guys, After downgrading from 5.1.1 to 4.3.4 it shows me that I need to upgrade 0/BPID0/SP Location but I can not find a way to do it, is there any other procedure to do that? here are some outputs when I tried to upgrade the location 0/BPID0/SP...
Hello, I am configuring an a couple of ASR9K6's for BNG to replace some old Ericsson Redback equipment, is there anyway to limit suscriber sessions per PPPoE username to 1 session instance per PPPoE username on the BNG platform like we could on the...
Hi Are doing tests with a HQOS profile for L2VPN with 4 cos levels where EF and AF4 are prioritized and limited to take max 50%. The remaining bandwidth are to be shared between AF3 and AF1 in a 9 to 1 relation. For this "bandwidth remaining ratio" i...
Dear all, Our customer want to deploy Bras on ASR 9000 device. We want to propose them the A9K-24X10GE-1G-SE linecards for service termination. Does anyone help to clarify this linecard support Bras function or not? Thanks,
