07-20-2016 09:29 PM
Hi,
Can ASR9001's built in ports support 10Gig connection using Twinax Cables:
Thanks!
-Mazzy
Solved! Go to Solution.
07-21-2016 08:19 AM
We only support the active cable ACU not the CU (passive) cables.
Support came in 5.1.1
Thanks,
Sam
07-22-2016 05:41 AM
07-20-2016 11:46 PM
The SFP+s that are supported and the minimum software version needed for the ASR9001 are listed here:
SFP-10G-SR |
XR 4.2.1 |
XR 4.2.1 |
SFP-10G-ZR |
XR 5.1.1 |
XR 5.1.1 |
CWDM-SFP10G-XXXX |
XR 5.2.2 |
XR 5.2.2 |
SFP-10G-BXD-I |
XR 5.2.0 |
XR 5.2.0 |
07-22-2016 09:12 PM
Thanks Mark!
07-21-2016 08:19 AM
We only support the active cable ACU not the CU (passive) cables.
Support came in 5.1.1
Thanks,
Sam
07-21-2016 06:30 PM
Hi smiltea,
Thanks for this info.
so that means I can use the ff:
0GBASE-CU SFP+ Cable 7 Meter, active |
SFP-H10GB-ACU7M |
10GBASE-CU SFP+ Cable 10 Meter, active |
SFP-H10GB-ACU10M |
10GBASE-AOC SFP+ Cable 1 Meter |
SFP-10G-AOC1M |
10GBASE-AOC SFP+ Cable 2 Meter |
SFP-10G-AOC2M |
10GBASE-AOC SFP+ Cable 3 Meter |
SFP-10G-AOC3M |
10GBASE-AOC SFP+ Cable 5 Meter |
SFP-10G-AOC5M |
10GBASE-AOC SFP+ Cable 7 Meter |
SFP-10G-AOC7M |
10GBASE-AOC SFP+ Cable 10 Meter |
SFP-10G-AOC10M |
Provided that the facing equipment supports them as well (example 3560-X with 10G module).
Thanks!
07-22-2016 05:41 AM
Only the ACU variant is supported.
Thanks,
Sam
07-24-2016 10:04 PM
Thanks Sam!
12-15-2016 01:27 AM
Hi Sam,
what about Cisco SFP-10G-AOC2M - Active Optical Cable assembly?
This one is also active.
I have found it here:
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-455693.html
12-15-2016 05:10 AM
That variant is not supported.
Thanks,
Sam
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: