CRS 4.3.0 ebgp-multihop

[dfauluchi]

Hi guys,

I upgraded a CRS1-8 from 3.9.2 to 4.3.0 using turboboot.

In 3.9.2 there were 2 ebgp-multihop neighbors configured (and established) with ttl=2.

When the router started with 4.3.0 I copied the same config, but I had to configure ttl=3 to make those 2 neighbors come up.

I didn't find bugs related to ebg-multihop ttl in this version. Anyway, I used CSM1.0 to select SMUs and activated all recommended SMUs but one (they don' t have enough space in disk0:).

The one that's missing is: Umbrella DDTS for kimono fixes - CSCue45856

Bug description and details couldn't say less...I can't figure out what kimono fixes mean. Any ideas?

Thanks in advance.

Diego.

[Rivalino Tamaela]

Hi Diego,

kimono is codename for plim card 6-10GE-WLO-FLEX. CSCue45856 contains fixes related with this card. If you don't have that card, you can skip this ddts.

HTH,

Riv

[Rivalino Tamaela · Accepted solution]

Regarding ebgp-multihop, this looks like CSCum1306 (ebgp-multihop configuration inconsistency seen on customer network), which is duplicate of CSCue06523.

CSCue06523 is fixed in 4.3.1, and 5.1.0.

thanks,

rivalino