cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

154
Views
0
Helpful
6
Replies
Beginner

CRS increase cache size "error"

hello,

I want to increasing the cache size.But while committing the config ,it's failed.

This is the output.

RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC#conf t
Mon Feb 22 09:33:49.668 beijing
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config)#flow?
flow  
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config)#flow monitor-map FNF_MONITOR_MAP
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config-fmm)#cache ?
  entries    Specify the number of entries in the flow cache
  permanent  Disable removal of entries from flow cache
  timeout    Specify the flow cache timeouts
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config-fmm)#cache entries ?
  <4096-1000000>  Number of flow cache entries
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config-fmm)#cache entries 100000
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config-fmm)#commit

% Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed' from this session to view the errors
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config-fmm)#

Please help me to solve it.

6 REPLIES 6
Cisco Employee

I noticed that you missed the

I noticed that you missed the configuration for the record type prior to specifying the cache size.

E.g.

  • record ipv4
  • record ipv4 [peer as]
  • record ipv6
  • record mpls [labels number]
  • record mpls [ipv4-fields] [labels number]
  • record mpls [ipv6-fields] [labels number]
  • record mpls [ipv4-ipv6-fields] [labels number]

Beginner

I had done that.

I had done that.

The flow configuration:

flow exporter-map FNF_EXPORT_MAP
version v9
options interface-table timeout 10
options sampler-table timeout 10
template data timeout 10
template options timeout 10
!
transport udp 9996
source Loopback0
destination 113.141.x.x
!
flow exporter-map FNF_EXPORT_MAP_1
version v9
options interface-table timeout 10
options sampler-table timeout 10
template data timeout 10
template options timeout 10
!
transport udp 50040
source Loopback0
destination 1.85.x.x
!
flow exporter-map FNF_EXPORT_MAP_2
version v9
options interface-table timeout 10
options sampler-table timeout 10
template data timeout 10
template options timeout 10
!
transport udp 9995
source Loopback0
destination 117.37.X.X
!
flow monitor-map FNF_MONITOR_MAP
record ipv4
exporter FNF_EXPORT_MAP
exporter FNF_EXPORT_MAP_1
exporter FNF_EXPORT_MAP_2
!

Cisco Employee

Thanks for providing the

Thanks for providing the complete configuration. Can you also provide the outputs of show version and show install active please?

Beginner

IOS XR Configuration 4.0.4

IOS XR Configuration 4.0.4


RP/0/RP0/CPU0:XX-ZJB-CR-2.IDC(admin)#show install active summary
Wed Feb 3 10:10:55.977 beijing
Default Profile:
Admin Resources
SDRs:
Owner
Active Packages:
disk0:hfr-doc-px-4.0.4
disk0:hfr-k9sec-px-4.0.4
disk0:hfr-mpls-px-4.0.4
disk0:hfr-mgbl-px-4.0.4
disk0:hfr-px-4.0.4.CSCtx96252-1.0.0
disk0:hfr-mcast-px-4.0.4
disk0:hfr-px-4.0.4.CSCtw73941-1.0.0
disk0:hfr-px-4.0.4.CSCtx18612-1.0.0
disk0:hfr-mini-px-4.0.4
disk0:hfr-px-4.0.4.CSCty67682-1.0.0
disk0:hfr-px-4.0.4.CSCtu16989-1.0.0
disk0:hfr-px-4.0.4.CSCtn12086-1.0.0
disk0:hfr-px-4.0.4.CSCts66753-1.0.0
disk0:hfr-px-4.0.4.CSCtn50180-1.0.0
disk0:hfr-px-4.0.4.CSCtz62593-1.0.0
disk0:hfr-px-4.0.4.CSCtz32559-1.0.0
disk0:hfr-px-4.0.4.CSCtv01998-1.0.0
disk0:hfr-px-4.0.4.CSCtx68063-1.0.0
disk0:hfr-fpd-px-4.0.4
disk0:hfr-diags-px-4.0.4
disk0:hfr-px-4.0.4.CSCtx83486-1.0.0
disk0:hfr-px-4.0.4.CSCtx42830-1.0.0
disk0:hfr-px-4.0.4.CSCtr18646-1.0.0
disk0:hfr-px-4.0.4.CSCts71012-1.0.0
disk0:hfr-px-4.0.4.CSCtt20076-1.0.0
disk0:hfr-px-4.0.4.CSCtw47685-1.0.0
disk0:hfr-px-4.0.4.CSCtu21454-1.0.0
disk0:hfr-px-4.0.4.CSCtz41742-1.0.0

Highlighted
Cisco Employee

I have verified this config

I have verified this config on a CRS-1 node running 4.1.1 which should be fairly close to your software version.

Can you please get us the show tech netflow and open a TAC SR?

Beginner

Thank you! I  will try to

Thank you! I  will try to open a TAC SR.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards