cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
777
Views
0
Helpful
2
Replies
Highlighted
Beginner

DHCP Server within a VRF - ASR9K running 5.3.3

I would like to create a dhcp server within a vrf. I did read the DAPS Support document which does allow the user to configure an address range within a vrf but the other options like default router, DNS, etc are not there. Any help would be appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Hi,

Hi,

based on what I have read in:

http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/addr-serv/configuration/guide/b-ipaddr-cg53asr9k/b-ipaddr-cg53asr9k_chapter_0101.html#concept_CA2B956D03FB4533A3653BD0119AC788

I think you should be able to do it. If you try to do it, is there any missing commands or issues?

View solution in original post

2 REPLIES 2
Highlighted
Beginner

Hi,

Hi,

based on what I have read in:

http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/addr-serv/configuration/guide/b-ipaddr-cg53asr9k/b-ipaddr-cg53asr9k_chapter_0101.html#concept_CA2B956D03FB4533A3653BD0119AC788

I think you should be able to do it. If you try to do it, is there any missing commands or issues?

View solution in original post

Highlighted
Beginner

Hi Borgenstrand,

Hi Borgenstrand,

Thank you for your help. This was what I needed.

Fred

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey