dual asr 9006 cluster

[Umit AYDINLI]

Hi expert,

I have two asr 9006. I'm using dual rsp on router. I'm using Cisco IOS XR Software, Version 4.1.2.

I want to use two asr 9006 to cluster. But How can do this? I can't find documents on the cisco web site or internet. 

[smilstea · Accepted solution]

Hi Umit,

SW requirement

•Supported since 4.2.1

•Requires cluster software license on each chassis

HW requirement – Chassis

•Only ASR 9006 and 9010 are supported in 4.2.x

•ASR 9001 is supported starting in 4.3.0

•ASR 9001-S and 9922 are supported starting in 4.3.1

•ASR 9904 and 9912 are supported starting in 5.1.1

•Only like-like chassis are supported

HW requirement – Line card and RSP

•Dual RSP440 for 9006/9010/9904

•Dual RP for 9912/9922

•Single RSP 9001/9001-S

•No RSP-4/8G support

•Only Typhoon LC and SIP-700 allowed to boot

•Only Typhoon LC support IRL

•VSM/ISM not supported

We have more information on nV Edge posted here

https://supportforums.cisco.com/docs/DOC-34114

HTH,

Sam

[Umit AYDINLI]

Many thanks.

I have dual a9k-rsp-4g. It seems I have unsupported hardware.


Sent from Cisco Technical Support Android App