I have a wireshark here of an ASR 9010 which is setting off triggers in a monitoring system for sending a bunch of ARP requests that look like gratuitous ARPS for reasons I can't seem to determine. It is going on like this continually. I am looking for a little assistance in determining why.
router hsrp
interface BVI17201
address-family ipv4
hsrp 1
preempt
priority 100
address 172.16.1.1
!
!
!
interface BVI17208
address-family ipv4
hsrp 1
preempt
priority 100
address 172.16.8.1
!
!
!
!
BVI17201 is up, line protocol is up
Interface state transitions: 1
Hardware is Bridge-Group Virtual Interface, address is a80c.0d30.3eb0
BVI17208 is up, line protocol is up
Interface state transitions: 1
Hardware is Bridge-Group Virtual Interface, address is a80c.0d30.3eb0
router hsrp
interface BVI17201
address-family ipv4
hsrp 1
preempt
priority 90
address 172.16.1.1
!
!
!
interface BVI17208
address-family ipv4
hsrp 1
preempt
priority 90
address 172.16.8.1
!
!
!
!
BVI17201 is up, line protocol is up
Interface state transitions: 1
Hardware is Bridge-Group Virtual Interface, address is 6c9c.ed10.27b8
Wed Apr 8 19:36:45.708 UTC
BVI17208 is up, line protocol is up
Interface state transitions: 1
Hardware is Bridge-Group Virtual Interface, address is 6c9c.ed10.27b8