cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
663
Views
0
Helpful
1
Replies

gettin snmp running config asr9k

Gabriel Ponce
Level 1
Level 1

Hi

I want to get sh running config via snmp from ASR9K

somebody could help me ?

Thanks

1 Reply 1

Rivalino Tamaela
Cisco Employee
Cisco Employee

Hello Gabriel,

ASR9k does support CISCO-CONFIG-COPY-MIB as you can see from below:

ftp://ftp.cisco.com/pub/mibs/supportlists/crs1/crs1-supportlist.html#_IOS_XR_4.2.0

You can test with the following snmp:

1.3.6.1.4.1.9.9.96.1.1.1.1.14.0 i 5

1.3.6.1.4.1.9.9.96.1.1.1.1.2.0 i 1

1.3.6.1.4.1.9.9.96.1.1.1.1.3.0 i 4

1.3.6.1.4.1.9.9.96.1.1.1.1.4.0 i 1

1.3.6.1.4.1.9.9.96.1.1.1.1.5.0 a 10.66.164.5

1.3.6.1.4.1.9.9.96.1.1.1.1.6.0 s mark

1.3.6.1.4.1.9.9.96.1.1.1.1.14.0 i 1

1.3.6.1.4.1.9.9.96.1.1.1.1.14.0 i 6

Basically those OIDs is to copy running config to tftp server 10.66.164.5 and filename mark.

You can read the following doc to set the snmp:

https://supportforums.cisco.com/docs/DOC-1860

HTH,

rivalino


Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: