How to how our engine cards?

[chainarongdachawat]

                   Hi All,

How to know our engine cards version? now we're using IOS XR version 4.2 and Can anyone explan to me what the XR command?

Thanks and have nice weekend.

Kversion.

[Nicolas Fevrier]

Hi,

you can use "show platform" or "admin show platform" to get a short version of the content of your chassis.

then you can use "show diag" for a lenghtier but exhaustive view.

Ex: "sh diag 0/RSP0/CPU0"

Cheers,

N.

[chainarongdachawat]

Hi Nicolas,

Thanks for your help, and I'll put that command and update the result to you. However I need to usd AToM (PPP on POS interface) founction i dont' sure that my system already support that function or not;

This is my hardware now:

RP/0/RP0/CPU0#sh diag ?

  0/0/CPU0    Fully qualified location specification

  0/1/CPU0    Fully qualified location specification

  0/2/CPU0    Fully qualified location specification

  0/RP0/CPU0  Fully qualified location specification

  0/RP1/CPU0  Fully qualified location specification

  WORD        Fully qualified location specification

  WORD        Partially qualified location specification

  details     display more details than the normal show diag

  summary     display a summary (one line per slot) of the chassis

  |           Output Modifiers

RP/0/RP0/CPU0:#sh diag summary

Fri Jul 19 10:06:40.651 THAI

CARD 0/0/* : Cisco CRS-1 Series Forwarding Processor 40G

PLIM 0/PL0/* : Cisco CRS-1 Series 4x10GE Interface Module

CARD 0/1/* : Cisco CRS-1 Series Forwarding Processor 40G

PLIM 0/PL1/* : Cisco CRS-1 Series 20x1GE Flexible Interface Module

SPA 0/1/0 : 10-port 1 GbE Shared Port Adapter V2

SPA 0/1/1 : 8-port OC12/STM4 POS Shared Port Adapters

SPA 0/1/2 : 10-port 1 GbE Shared Port Adapter V2

SPA 0/1/4 : 4-port OC48/STM16 POS/RPR Shared Port Adapter

CARD 0/2/* : Cisco CRS-1 Series Forwarding Processor 40G

PLIM 0/PL2/* : Cisco CRS-1 Series 4x10GE Interface Module

CARD 0/RP0/* : Cisco CRS-1 Series 8 Slots Route Processor

CARD 0/RP1/* : Cisco CRS-1 Series 8 Slots Route Processor

Thanks,

Kay

[Aleksandar Vidakovic]

Hi Kay,

AToM features are not dependent on the SPA. They are entirly implemented on the line card, in this case the SIP-700.

You simply have to refer to configuration guide to see whether there are any restrictions. Search for "asr9000 atom pos" on www.cisco.com and you'll find the doc that you're looking for.

/Aleksandar

[Bryan Garland]

Kay,

I am not real sure on the question here.  Usually "what engine" type of question is for the 12k.  It has multiple engine cards that have been developed over it's lifetime.  XR supports engine 3 and 5.  But your output is from a CRS.  CRS doesn't have different engines.  It does have CRS-1 or CRS-3 cards.  But all of yours are CRS-1. 

Now it's looking like you are wanting to do ATOM over PPP?  I did a quick look at the configuration guides.  Not sure if CRS supports this right now. 

http://www.cisco.com/en/US/docs/routers/crs/software/crs_r4.3/lxvpn/configuration/guide/vc43vpls.html

Thanks,

Bryan

[chainarongdachawat]

Thanks for all,

My devices is CRS-1 (XR-Version 4.1.2).