According to NCS5500 configuration guide, it doesn't support ABF with VRF select.
Is it the roadmap? If yes, when will it be supported?
Solved! Go to Solution.
So far it has not been implemented. Can you please help us to understand the use-case for this and why ABF with “IP” or “IP+VRF” NH (which we both support) cannot be used instead.
I have some good news. I checked with project team in background and was advised that "VRF-Select" along with "VRF Fallback" will be available from 6.5.1. 6.5.1 is targeted for July/August 2018.
Unfortunately NCS5501 does not support 6.5.1. 6.5.2 is coming beginning 2019 so lets check on that. I will try to get a hold of a lab to test is as well and let you know.
Does Cisco official support VRF select with ABF on NCS 5500. I can configure it on 6.5.3.
However documentation mentions its not supported.
ipv4 access-list ABF-TEST-VRF
10 permit ipv4 100.64.0.0 0.0.255.255 host 18.104.22.168 nexthop1 vrf test ipv4 22.214.171.124
15 permit ipv4 126.96.36.199 0.0.0.255 any nexthop1 vrf test
Please confirm. If not supported then possibly target release for this support ?