cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
886
Views
0
Helpful
4
Replies

problem in isis route leaking

fouad.jabri
Level 1
Level 1

Hi,

is there any known issu with ASR903 isis route leaking?

version 3.10.01.S IOS XE

Thanks.

4 Replies 4

Vinit Jain
Cisco Employee
Cisco Employee

Hello Fouad

Could you please share the config and the show version. I have noticed few issues with isis redistribution but need to verify what exactly is being done.

Vinit

Thanks
--Vinit

Hi Vinit,

show version :

Cisco IOS XE Software, Version 03.10.01.S - Extended Support Release

Cisco IOS Software, ASR903 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.3(3)S1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Fri 25-Oct-13 15:00 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.

All rights reserved.  Certain components of Cisco IOS-XE software are

licensed under the GNU General Public License ("GPL") Version 2.0.  The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.  For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

ROM: IOS-XE ROMMON

ME-MOH-ONE-01 uptime is 2 weeks, 5 days, 14 hours, 51 minutes

Uptime for this control processor is 2 weeks, 5 days, 14 hours, 54 minutes

System returned to ROM by reload

System image file is "bootflash:issu/packages.conf"

Last reload reason: PowerOn

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

License Level: metroaggrservices

License Type: Permanent

Next reload license Level: metroaggrservices

cisco ASR-903 (RSP1) processor with 950897K/6147K bytes of memory.

Processor board ID FOX1740P25G

16 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

32768K bytes of non-volatile configuration memory.

3670016K bytes of physical memory.

1328927K bytes of SD flash at bootflash:.

Configuration register is 0x2

config:

router isis xyz

net 49.V.W.X.Y.Z

advertise passive-only

ispf level-1

metric-style wide

no hello padding

log-adjacency-changes

nsf cisco

redistribute isis ip level-1 into level-2 route-map loopback-range1-map

redistribute isis ip level-2 into level-1 route-map loopback-range2-map

passive-interface Loopback0

bfd all-interfaces

mpls ldp sync

Issue: router in the other side can't see leaked routes from l-1 to l-2

What is the output of show ip route on the router on the other side which can't see leaked routes. Can you try the below config and see if its working or not:

int lo0
 isis tag 110

router isis
 net 49.0001.0001.0001.0001.00
 redistribute isis ip level-1 into level-2 route-map match-tag

route-map match-tag permit 10
 match tag 110
Thanks
--Vinit

quocthaiht6
Level 1
Level 1

have the information about the new LSIS?

-------------------------------------------------------------

Macbook Pro