Hello,
i tried to upgrade RSP-4G from 5.3.4 to 6.1.4
i follow instructions until activation :
after install activate router crash
after reset i received this message
Selecting ROMMON Image... B
DDR in Interleaved mode
POST 1 : PASSED : code 0 : DDR2 Memory Quick Test
CPU Reset Reason = 0x000d
POST 2 : PASSED : code 0 : FPGA Flash Image CRC Checks
Loading Field Programmable Devices:
FPGA 0-B PROGRAMMED : image: 0xff500028 - 0xff576cca, et: 118ms
FPGA 1-B PROGRAMMED : image: 0xff400028 - 0xff4d1034, et: 206ms
FPGA 2-B PROGRAMMED : image: 0xff100028 - 0xff276358, et: 369ms
FPGA 3-B PROGRAMMED : image: 0xff000028 - 0xff0454a8, et: 69ms
System Bootstrap, Version 1.06(20120210:003513) [ASR9K ROMMON],
Copyright (c) 1994-2012 by Cisco Systems, Inc.
Compiled Thu 09-Feb-12 16:35 by saurabja
CPUCtrl: 1.17 [00000001/00000011]
ClkCtrl: 1.23 [00000001/00000017]
IntCtrl: 1.15 [00000001/0000000f]
Punt: 1.5 [00000001/00000005]
CBC: 1.3
BID: 0x0006
PPC 8641D (partnum 0x8004), Revision 03.00, (Core Version 02.02)
M8641 CLKIN: 66 Mhz
Core Clock: 1333 Mhz
MPX Clock: 533 Mhz
LBC Clock: 33 Mhz
POST 3 : PASSED : code 0 : Slot ID/Board Type Validity
PCI-E1: Ready as Root Complex
PCI-E2: Ready as Root Complex
set_chassis_type: chassis_type=0xef02fb found=TRUE
ASR9K (8641D PPC) platform with 4096 Mb of main memory
program load complete, entry point: 0x100000, size: 0x2ac20
program load complete, entry point: 0x100000, size: 0x2ac20
MBI Candidate = disk0:asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm
CARD_SLOT_NUMBER: 0
CPU_INSTANCE: 1
MBI Validation starts ...
Mgt LAN 0 interface is selected
tsec_init_hw: configuring FE (port 2) for: Auto Speed, Auto Duplex
tsec_init_interface: hardware initialization completed
Interface link changed state to UP.
Interface link state up.
MBI validation sending request.
HIT CTRL-C to abort
..........
No MBI confirmation received from dSC
AUTOBOOT: Boot string = disk0:asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm,1;
AUTOBOOT: autobootstate=0, autobootcount=0, cmd=boot disk0:asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm
program load complete, entry point: 0x100000, size: 0x2ac20
MBI size from header = 21979816,Bootflash resident MBI filesize = 21979816
....................................................................................
program load complete, entry point: 0x204184, size: 0x14f53a8
Attempting to start second CPU
Config = SMP, Running = SMP
Board type: 0x00100302
Card Capability = 0xffffffff
##############################################################################################################
BSP: Board type : RO-RSP2
Processor family/kernel mismatch (2/4)
Crash[0,0] at init_cpu line 220.
i saw that it's possible to have X64 versions of IOS XR so
afterwards i treied in rommon to reactivate old IOSXR
rommon B2 > boot disk0:asr9k-os-mbi-5.3.4/0x100000/mbiasr9k-rp.vm
program load complete, entry point: 0x100000, size: 0x2ac20
MBI size from header = 21782464,Bootflash resident MBI filesize = 21782464
....................................................................................
program load complete, entry point: 0x2040c8, size: 0x14c50c0
Attempting to start second CPU
Config = SMP, Running = SMP
Board type: 0x00100302
Card Capability = 0xffffffff
###############################################################################################################
BSP: Board type : RO-RSP2
tracelogger: starting tracing in background ring mode
tracelogger running with args: -startring -F 1 -F 2
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS XR Software for the Cisco XR ASR9K, Version 5.3.4
Copyright (c) 2016 by Cisco Systems, Inc.
Jan 16 15:30:20.110: Install Setup: Booting with software activated by previous install operation
Jan 16 15:31:04.887: Install Setup: This node was booted with an incorrect MBI version (/bootflash/disk0/asr9k-os-mbi-5.3.4/0x100000/mbiasr9k-rp.vm) and will now reset to boot with the correct MBI (/bootflash/disk0/asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm)
Spawning instdir_show_ltrace -r failed. : No such file or directory
Spawning instdir_show_ltrace -Z -r failed. : No such file or directory
Spawning inst_rds_show_ltrace -r failed. : No such file or directory
reboot internal start: cause code 72 cause dSC booted with incorrect MBI
reboot_internal timeout 30 is gracef[0x34b473ba6] Record Reboot History, reboot cause = 0x4000048, descr = Cause: dSC booted with incorrect MBI Process: instsetup Traceback: 50002eb8 4cb66rebooting
Selecting ROMMON Image... B
DDR in Interleaved mode
POST 1 : PASSED : code 0 : DDR2 Memory Quick Test
CPU Reset Reason = 0x000d
POST 2 : PASSED : code 0 : FPGA Flash Image CRC Checks
Loading Field Programmable Devices:
FPGA 0-B PROGRAMMED : image: 0xff500028 - 0xff576cca, et: 117ms
FPGA 1-B PROGRAMMED : image: 0xff400028 - 0xff4d1034, et: 206ms
FPGA 2-B PROGRAMMED : image: 0xff100028 - 0xff276358, et: 369ms
FPGA 3-B PROGRAMMED : image: 0xff000028 - 0xff0454a8, et: 69ms
System Bootstrap, Version 1.06(20120210:003513) [ASR9K ROMMON],
Copyright (c) 1994-2012 by Cisco Systems, Inc.
Compiled Thu 09-Feb-12 16:35 by saurabja
CPUCtrl: 1.17 [00000001/00000011]
ClkCtrl: 1.23 [00000001/00000017]
IntCtrl: 1.15 [00000001/0000000f]
Punt: 1.5 [00000001/00000005]
CBC: 1.3
BID: 0x0006
PPC 8641D (partnum 0x8004), Revision 03.00, (Core Version 02.02)
M8641 CLKIN: 66 Mhz
Core Clock: 1333 Mhz
MPX Clock: 533 Mhz
LBC Clock: 33 Mhz
POST 3 : PASSED : code 0 : Slot ID/Board Type Validity
PCI-E1: Ready as Root Complex
PCI-E2: Ready as Root Complex
but it failed again
For the moment, it was impossible for me to replace the Old versions
please let me know if you have an idea
PS : if needed i also have RSP with current 5.3.4 Version up and running
regards
