UCS C220 M7 Licensing XRV-M7-APLN-25G/S-XRV-ROUTE/R-XRV9000-2442-RR

[rainow]

Hi there

Referring to https://www.cisco.com/c/en/us/td/docs/routers/virtual-routers/configuration/guide/b-xrv9k-cg.html

Restrictions and Guidelines for Smart Licensing state that Smart Licensing and/or Smart Licensing Using Policy is not supported on the following Cisco XRv9000 appliances:

• UCS C220 M4S

• UCS C220 M5SX

• UCS C220 M7

I would like to confirm the activation process for S-XRV-ROUTE-T4 on XRV-M7-APLN-25G running R-XRV9000-2442-RR software.

According to Cisco Build & Price, the S-XRV-ROUTE-T4 license requires a Smart Account.
However, the restriction on Smart Licensing for UCS C220 M7 seems to conflict with this requirement.

How should this license be activated in this scenario?

[syaifulnizamshamsudin]

Adakah ianya boleh dikombine atau dinaik taraf lesen?

[anpetit · Accepted solution]

Hello @rainow , 

Hope everything is fine on your end. 

S-XRV-ROUTE-T4 doesn't require smart account. 
Allow me some time to get this corrected. 

Please, let me know if this answer helps you. 

Have a nice day
Kind Regards,

Antoine

[rainow]

@anpetit 

Thanks for your information 
beside that does S-A9K-400G-ENABLE license need SA?

Best regards.

[anpetit]

Hi @rainow , 

Yes, as far as I know, S-A9K-400G-ENABLE is not enforced and there should be a license on the CSSM. 
Might need to run 7.9.1 to get this correctly consumed.

Please, let me know if this answer helps you.

Have a nice day

Kind Regards,
Antoine