XRV9000-SBFD for SR-TE policy dosen't work with version 7.3.1

[zijing]

Hi,

  I config sbfd for SR-TE policy，but the bfd couldn't up with version 7.3.1. Configuration as follows:

  SBFD Reflector:

 interface Loopback0
  ipv4 address 1.1.1.24 255.255.255.255
 !

  sbfd
   local-discriminator interface Loopback0
   !

   

   SBFD Initiator:

   bfd
    multipath include location 0/0/CPU0
   !  

  sbfd
   remote-target ipv4 1.1.1.24
  remote-discriminator 16843032
 ! 

 segment-routing
  traffic-eng
  policy R11toR24
  color 20 end-point ipv4 1.1.1.24
  bfd
  minimum-interval 300
  multiplier 3
  invalidation-action none
 !
 candidate-paths
 preference 100
 dynamic
 pcep
 !
 metric
 type igp

 Status：

 

 I don't know what's wrong about it.Dose some config wrong or the platform doesn't support sbfd for SR-TE policy.

[hushang]

Hi , Experts:

I had the same problem in 7.1.2, can anyone answer?

xrv support SBFD over SR-TE?

[smilstea]

SBFD is not supported on xrv9k.

Sam

[hushang]

Hi , Sam:

Thank you for your reply.

For xrv9k, are there any plans to support SBFD?

[smilstea]

There are no plans of yet.

Sam