cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
275
Views
0
Helpful
0
Replies
zijing
Beginner

XRV9000-SBFD for SR-TE policy dosen't work with version 7.3.1

Hi,

  I config sbfd for SR-TE policy,but the bfd couldn't up with version 7.3.1. Configuration as follows:

  SBFD Reflector:

 interface Loopback0
  ipv4 address 1.1.1.24 255.255.255.255
 !

  sbfd
   local-discriminator interface Loopback0
   !

   ~E0@WL{LFKSP1]Z3D8X5C8D.png

 

   SBFD Initiator:

   bfd
    multipath include location 0/0/CPU0
   !  

  sbfd
   remote-target ipv4 1.1.1.24
  remote-discriminator 16843032
 ! 

 segment-routing
  traffic-eng
  policy R11toR24
  color 20 end-point ipv4 1.1.1.24
  bfd
  minimum-interval 300
  multiplier 3
  invalidation-action none
 !
 candidate-paths
 preference 100
 dynamic
 pcep
 !
 metric
 type igp

  

 Status:

 

 5N1)T~W`$`8{U~D_JOW)A@E.png

PSCV6GDD$8XMUIC5}F}[}TE.png

 I don't know what's wrong about it.Dose some config wrong or the platform doesn't support sbfd for SR-TE policy.

0 REPLIES 0