cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
441
Views
0
Helpful
4
Replies
Highlighted
Beginner
Beginner

ZTP with IOS-XRv

Hi guys

I am trying to get started with ZTP on AS9000v and I can't make it work

Apparently the router comes up with all the interfaces down and I need to manually login, add the user admin and then configure the Management interface for DHCP , do a no shut on the interface and eventually do a ztp init (not sure if ztp breakout is needed here)


Note: I am using this in GNS3 (qemu and Ubuntu 18 underneath)

 

Is it normal for the interface to be down when the router starts?

 

4 REPLIES 4
Highlighted
Participant

Re: ZTP with IOS-XRv

Maybe a way around this would be to do this once (setup everything necessary for the ZTP) and save the config.

And then just use the copy of this “default-ztp-disk“ image with every new ASR9kv instance.

You’re in the realm of virtual so take advantage of that ;)

 

adam  

adam
Highlighted
Cisco Employee

Re: ZTP with IOS-XRv

Hi,

 

When I ZTP I also apply a DAY0 config that has the interfaces no shut.

Highlighted
Cisco Employee

Re: ZTP with IOS-XRv

See

https://xrdocs.io/device-lifecycle/tutorials/2016-08-26-working-with-ztp/#more-complex-example

for an example of a script for initial prep of XRv9K, including unique RSA keys. Can modify to prep up nodes for further config using NETCONF/SSH.

Highlighted
Beginner
Beginner

Re: ZTP with IOS-XRv

Thanks guys I figured out how to do it in the end. It was indeed a combinations of the above

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey