06-01-2017 10:26 PM
Hi ,
We send below XML RPC to NCS5501 cisco router to get XML RPC reply output. Its taking 10 minutes to get output for received routes .
<bgp xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-ipv4-bgp-oper">
<instances>
<instance>
<instance-name>default</instance-name>
<instance-active>
<default-vrf>
<afs>
<af>
<af-name>l2vpnevpn</af-name>
<path-table>
<path>
<rd/>
<network/>
<prefix-length/>
<neighbor-address></neighbor-address>
<attributes-after-policy-in>
<common-attributes>
<local-preference/>
</common-attributes>
</attributes-after-policy-in>
<path-information>
<neighbor-address>
<ipv4-address></ipv4-address>
</neighbor-address>
<is-path-received-only>false</is-path-received-only>
<next-hop/>
<path-weight/>
</path-information>
</path>
</path-table>
</af>
</afs>
</default-vrf>
</instance-active>
</instance>
</instances>
</bgp>
Corresponding CLI is below
RP/0/RP0/CPU0:dedsdf1002js1#sh bgp l2vpn evpn neighbors 10.80.11.19 received routes
Fri Jun 2 00:50:43.208 EDT
BGP router identifier 10.80.11.17, local AS number 62300
BGP generic scan interval 60 secs
Non-stop routing is enabled
BGP table state: Active
Table ID: 0x0 RD version: 0
BGP main routing table version 54806
BGP NSR Initial initsync version 8466 (Reached)
BGP NSR/ISSU Sync-Group versions 0/0
BGP scan interval 60 secs
Status codes: s suppressed, d damped, h history, * valid, > best
i - internal, r RIB-failure, S stale, N Nexthop-discard
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 19:21023
*>i[1][0000.60d3.1000.0100.1248][0]/120
10.80.13.19 100 0 i
*>i[2][0][48][0000.54f4.891b][32][10.64.203.3]/136
10.80.13.19 100 0 i
*>i[2][0][48][0000.54fe.365a][32][10.64.203.4]/136
10.80.13.19 100 0 i
*>i[2][0][48][0000.54fe.365c][32][10.64.203.5]/136
10.80.13.19 100 0 i
*>i[2][0][48][0000.54fe.365e][32][10.64.203.6]/136
10.80.13.19 100 0 i
Kindly let us know the resolution of this issue
Thanks
Jay
06-02-2017 10:42 AM
CLI output shows five prefixes. How many are retrieved programmatically? What's the line count of the entire XML output?
06-03-2017 06:45 PM
CLI output shows onl 21 prefixes , but we are getting XML rpc reply for other unwanted info .
Needs only received routes prefixes and RD value, Please check our rpc is correct or not
Thanks
Jay
06-06-2017 01:33 AM
Hi Santiago,
Kindly let us know the XML rpc is correct or not , because we are getting rpc reply taking time 8 to 10 mins.
<bgp xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-ipv4-bgp-oper">
<instances>
<instance>
<instance-name>default</instance-name>
<instance-active>
<default-vrf>
<afs>
<af>
<af-name>l2vpnevpn</af-name>
<path-table>
<path>
<rd/>
<network/>
<prefix-length/>
<neighbor-address></neighbor-address>
<attributes-after-policy-in>
<common-attributes>
<local-preference/>
</common-attributes>
</attributes-after-policy-in>
<path-information>
<neighbor-address>
<ipv4-address></ipv4-address>
</neighbor-address>
<is-path-received-only>false</is-path-received-only>
<next-hop/>
<path-weight/>
</path-information>
</path>
</path-table>
</af>
</afs>
</default-vrf>
</instance-active>
</instance>
</instances>
</bgp>
We are not facing any issue for show bgp l2vpn evpn advertised routes , only issue with received routes.
Thanks
Jay
Thanks
Jay
06-06-2017 04:01 AM
Jay,
I’ve passed on a query to the engineering team.
Cheers,
Einar
06-06-2017 05:11 AM
Thank you Einar !
06-06-2017 09:35 AM
We'll probably need some logging and sample output. We'll reach out to you directly. Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: