cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
144
Views
0
Helpful
1
Replies
Highlighted

One finding regarding YDK cisco_ios_xe_bundle API

Hello Yan,

Good morning!

Could you please have a look below issue ?  The issue was fixed by lower case of "g" in program. But I check API it seems upper

case of “G”.   So I am a bit confusing.  Can you give me some advice ?

 

Thanks a lot!

 

 

from ydk.models.cisco_ios_xe import Cisco_IOS_XE_native as xe_native

interface = xe_native.Native.Interface()

interface.gigabitethernet.append(gigabitethernet)    use lower case of "g" ,  program is correct but if use upper case of "G" , program is failed.   AttributeError: 'Interface' object has no attribute 'Gigabitethernet'

But from Cisco-ios-xe bundle API GigabitEthernet is upper case of "G" . So I am confused. May I know the reason we need to use

lower case of "g".

 

Thanks a lot

 

Cisco-ios-xe_bundle API

class Native.Interface.GigabitEthernet  ----- look like G is upper case.

 

 

 

from ydk.models.cisco_ios_xe import Cisco_IOS_XE_native as xe_native

interface = xe_native.Native.Interface()

gigabitethernet = interface.GigabitEthernet()
gigabitethernet.name = "2"
gigabitethernet.description = "configured by YDK"
interface.gigabitethernet.append(gigabitethernet)  ------------program successful

(ydk) jzhang@YDK64:~/Documents$ /root/virtualenv/ydk/bin/python3 /home/jzhang/Documents/configure_IP_address.py
2020-09-03 16:55:38,748 - ydk - INFO - Executing CRUD create operation on [interface]
2020-09-03 16:55:38,748 - ydk - INFO - Executing 'edit-config' RPC on [interface]
2020-09-03 16:55:38,883 - ydk - INFO - ============= Sending RPC to device =============
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <target>
    <running/>
  </target>
  <config><native xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native" xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
  <interface nc:operation="merge">
    <GigabitEthernet>
      <name>2</name>
      <description>configured by YDK</description>
    </GigabitEthernet>
  </interface>
</native>
</config>
</edit-config>
</rpc>
2020-09-03 16:55:39,445 - ydk - INFO - ============= Received RPC from device =============
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
  <ok/>
</rpc-reply>

2020-09-03 16:55:39,446 - ydk - INFO - Operation succeeded
2020-09-03 16:55:39,676 - ydk - INFO - Disconnected from device
(ydk) jzhang@YDK64:~/Documents$

 

interface.Gigabitethernet.append(gigabitethernet)  ------------program failed

 

(ydk) jzhang@YDK64:~/Documents$ /root/virtualenv/ydk/bin/python3 /home/jzhang/Documents/configure_IP_address.py
Traceback (most recent call last):
  File "/home/jzhang/Documents/configure_IP_address.py", line 36, in <module>
    config(interface)
  File "/home/jzhang/Documents/configure_IP_address.py", line 12, in config
    interface.Gigabitethernet.append(gigabitethernet)
AttributeError: 'Interface' object has no attribute 'Gigabitethernet'
2020-09-03 16:33:09,595 - ydk - INFO - Disconnected from device
(ydk) jzhang@YDK64:~/Documents$

 

 

Jacky Zhang
Global Telecom
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Participant

This is correct! The gigabitethernet is a list in the class Cisco_IOS_XE_native.Native.Interface. Please check API.

Yan Gorelik
YDK Solutions

View solution in original post

1 REPLY 1
Highlighted
Participant

This is correct! The gigabitethernet is a list in the class Cisco_IOS_XE_native.Native.Interface. Please check API.

Yan Gorelik
YDK Solutions

View solution in original post

Content for Community-Ad
Cisco Community October 2020 Spotlight Award Winners
This widget could not be displayed.