Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- Technology and Support
- DevNet Hub
- DevNet Networking
- Tools
- CSR1000v (IOS XE Version 16.09.03) doesn't react on RPC
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
2900
Views
0
Helpful
12
Replies
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-06-2019 06:51 AM
Hello.
I'm trying to set up BGP config via YDK with the following example:
import logging
from ydk.services import CodecService, CRUDService
from ydk.providers import CodecServiceProvider, NetconfServiceProvider
from ydk.models.openconfig import openconfig_bgp as oc_bgp
from ydk.models.openconfig import openconfig_bgp_types as oc_bgp_types
from ydk.filters import YFilter
logger = logging.getLogger('ydk')
logger.setLevel(logging.INFO)
handler = logging.StreamHandler()
formatter = logging.Formatter(("%(asctime)s - %(name)s - "
"%(levelname)s - %(message)s"))
handler.setFormatter(formatter)
logger.addHandler(handler)
DEVICES = {
'junos': {
'ip': '10.10.30.4',
'pass': 'Juniper'
},
'xr': {
'ip': '10.10.30.5',
'pass': 'admin'
},
'xe': {
'ip': '10.10.30.6',
'pass': 'admin'
}
}
def config_bgp(bgp):
"""Add config data to bgp object."""
# global configuration
bgp.global_.config.as_ = 65001
afi_safi = bgp.global_.afi_safis.AfiSafi()
afi_safi.afi_safi_name = oc_bgp_types.IPV6UNICAST()
afi_safi.config.afi_safi_name = oc_bgp_types.IPV6UNICAST()
afi_safi.config.enabled = True
bgp.global_.afi_safis.afi_safi.append(afi_safi)
# configure IBGP peer group
peer_group = bgp.peer_groups.PeerGroup()
peer_group.peer_group_name = "EBGP"
peer_group.config.peer_group_name = "EBGP"
peer_group.config.peer_as = 65002
peer_group.transport.config.local_address = "Loopback0"
afi_safi = peer_group.afi_safis.AfiSafi()
afi_safi.afi_safi_name = oc_bgp_types.IPV6UNICAST()
afi_safi.config.afi_safi_name = oc_bgp_types.IPV6UNICAST()
afi_safi.config.enabled = True
# afi_safi.apply_policy.config.import_policy.append("POLICY3")
# afi_safi.apply_policy.config.export_policy.append("POLICY1")
peer_group.afi_safis.afi_safi.append(afi_safi)
bgp.peer_groups.peer_group.append(peer_group)
# configure IBGP neighbor
neighbor = bgp.neighbors.Neighbor()
neighbor.neighbor_address = '2001:db8:e:1::1'
neighbor.config.neighbor_address = '2001:db8:e:1::1'
neighbor.config.peer_group = "EBGP"
bgp.neighbors.neighbor.append(neighbor)
if __name__ == '__main__':
# provider = CodecServiceProvider(type='xml')
# codec = CodecService()
bgp = oc_bgp.Bgp()
bgp.yfilter = YFilter.replace
config_bgp(bgp)
# print(codec.encode(provider, native))
device = DEVICES['xe']
provider = NetconfServiceProvider(
address=device['ip'],
port=830,
username='admin',
password=device['pass'],
protocol='ssh'
)
crud = CRUDService()
crud.create(provider, bgp)In the log output I see that everything went well:
2019-12-06 17:48:16,921 - ydk - INFO - Path where models are to be downloaded: /home/horseinthesky/.ydk/10.10.30.6
2019-12-06 17:48:16,933 - ydk - INFO - Connected to 10.10.30.6 on port 830 using ssh with timeout of -1
2019-12-06 17:48:16,934 - ydk - INFO - Executing CRUD create operation on [openconfig-bgp:bgp]
2019-12-06 17:48:16,934 - ydk - INFO - Executing 'edit-config' RPC on [openconfig-bgp:bgp]
2019-12-06 17:48:17,014 - ydk - INFO - ============= Sending RPC to device =============
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<target>
<running/>
</target>
<config><bgp xmlns="http://openconfig.net/yang/bgp" xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="replace">
<global>
<config>
<as>65001</as>
</config>
<afi-safis>
<afi-safi>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<config>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<enabled>true</enabled>
</config>
</afi-safi>
</afi-safis>
</global>
<neighbors>
<neighbor>
<neighbor-address>2001:db8:e:1::1</neighbor-address>
<config>
<peer-group>EBGP</peer-group>
<neighbor-address>2001:db8:e:1::1</neighbor-address>
</config>
</neighbor>
</neighbors>
<peer-groups>
<peer-group>
<peer-group-name>EBGP</peer-group-name>
<config>
<peer-group-name>EBGP</peer-group-name>
<peer-as>65002</peer-as>
</config>
<transport>
<config>
<local-address>Loopback0</local-address>
</config>
</transport>
<afi-safis>
<afi-safi>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<config>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<enabled>true</enabled>
</config>
</afi-safi>
</afi-safis>
</peer-group>
</peer-groups>
</bgp>
</config>
</edit-config>
</rpc>
2019-12-06 17:48:17,418 - ydk - INFO - ============= Received RPC from device =============
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
<ok/>
</rpc-reply>
2019-12-06 17:48:17,418 - ydk - INFO - Operation succeeded
2019-12-06 17:48:17,424 - ydk - INFO - Disconnected from deviceBut there is no BGP config on the device afterward
CSR6#show run | se bgp CSR6#
Solved! Go to Solution.
Labels:
- Labels:
-
YANG Development Kit (YDK)
2 Accepted Solutions
Accepted Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-10-2019 01:36 PM - edited 12-10-2019 02:33 PM
Could you please rerun this script with logging level DEBUG and attach the log to the post so I could understand why the YDK failed to get XE configuration.
Note. Because the filter for the NetconfService.get_config() is not specified, the YDK attempts to retrieve full configuration of the device. The returned result in this case is class Config instance, which is alias of EntityCollection class.
I do not understand, why later on you try to call codec.decode(), which expects as a parameter string value of payload. I guess you wanted to get result as XML and then print it. In this case the last operator should be:
xml_list = codec.encode(pr, config.entities(), pretty=True)
print("\nGOT DEVICE CONFIGURATION:\n%s" % '\n'.join(xml_list))
I executed such script on CiscoDevNet IOS XE sandbox router and got it working just fine (see attached log file)
Yan Gorelik
YDK Solutions
YDK Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 10:50 AM
Kirill
You get all python objects in the line:
config = netconf.get_config(provider, Datastore.running)
But they are placed into Config class, which is EntityCollection instance. Please check its API and use examples here. In order to get list of entities (python objects) simply run:
list_of_entities = config.entities()
Yan Gorelik
YDK Solutions
YDK Solutions
12 Replies 12
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-06-2019 10:11 AM - edited 12-06-2019 10:53 AM
This is similar to XRv9K NETCONF 1.1. The issue that you are observing is not related to YDK. As I can see in the log, the YDK worked perfectly well.
I believe you cannot configure BGP on Cisco routers using standard openconfig models. For this you should use proprietary Cisco models and/or openconfig-network-instance.
It is also possible that your particular device does not include BGP routing as a feature. You can try to do the BGP configuration on your device using CLI just to see if it is supported.
Yan Gorelik
YDK Solutions
YDK Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-09-2019 05:52 AM
It works really strange for me.
I've configured BGP process manually:
CSR6#show run | se bgp router bgp 6 bgp router-id 10.10.30.6 bgp log-neighbor-changes neighbor 10.10.30.5 remote-as 5
And then did get-config via ydk. This is what I've got:
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
<data>
<native xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native">
<version>16.9</version>
<boot-start-marker/>
<boot-end-marker/>
<service>
<timestamps>
<debug>
<datetime>
<msec/>
</datetime>
</debug>
<log>
<datetime>
<msec/>
</datetime>
</log>
</timestamps>
</service>
<platform>
<console xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-platform">
<output>serial</output>
</console>
</platform>
<hostname>CSR6</hostname>
<enable>
<password>
<secret>admin</secret>
</password>
</enable>
<username>
<name>admin</name>
<privilege>15</privilege>
<password>
<encryption>0</encryption>
<password>admin</password>
</password>
</username>
<username>
<name>horseinthesky</name>
<privilege>15</privilege>
</username>
<ip>
<domain>
<name>lab.local</name>
</domain>
<forward-protocol>
<protocol>nd</protocol>
</forward-protocol>
<route>
<ip-route-interface-forwarding-list>
<prefix>0.0.0.0</prefix>
<mask>0.0.0.0</mask>
<fwd-list>
<fwd>10.10.30.254</fwd>
</fwd-list>
</ip-route-interface-forwarding-list>
</route>
<ssh>
<pubkey-chain>
<username>
<name>horseinthesky</name>
<key-hash>
<key-type>ssh-rsa</key-type>
<key-hash-value>D13E140448650E64A6778D40057326E8 horseinthesky@Kappa</key-hash-value>
</key-hash>
</username>
</pubkey-chain>
</ssh>
<http xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-http">
<authentication>
<local/>
</authentication>
<server>true</server>
<secure-server>true</secure-server>
</http>
</ip>
<ipv6>
<unicast-routing/>
</ipv6>
<interface>
<GigabitEthernet>
<name>1</name>
<description>DON'T TOUCH ME</description>
<ip>
<address>
<primary>
<address>10.10.30.6</address>
<mask>255.255.255.0</mask>
</primary>
</address>
</ip>
<mop>
<enabled>false</enabled>
<sysid>false</sysid>
</mop>
<negotiation xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-ethernet">
<auto>true</auto>
</negotiation>
</GigabitEthernet>
<GigabitEthernet>
<name>2</name>
<description>Configured via ydk</description>
<ip>
<address>
<primary>
<address>172.16.1.0</address>
<mask>255.255.255.254</mask>
</primary>
</address>
</ip>
<ipv6>
<address>
<prefix-list>
<prefix>2001:DB8::1:0/127</prefix>
</prefix-list>
</address>
</ipv6>
<load-interval>30</load-interval>
<mtu>9192</mtu>
<speed xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-ethernet">
<value-1000/>
</speed>
<negotiation xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-ethernet">
<auto>false</auto>
</negotiation>
</GigabitEthernet>
<GigabitEthernet>
<name>3</name>
<shutdown/>
<mop>
<enabled>false</enabled>
<sysid>false</sysid>
</mop>
<negotiation xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-ethernet">
<auto>true</auto>
</negotiation>
</GigabitEthernet>
<GigabitEthernet>
<name>4</name>
<shutdown/>
<mop>
<enabled>false</enabled>
<sysid>false</sysid>
</mop>
<negotiation xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-ethernet">
<auto>true</auto>
</negotiation>
</GigabitEthernet>
<Loopback>
<name>0</name>
<ip>
<address>
<primary>
<address>1.1.1.6</address>
<mask>255.255.255.255</mask>
</primary>
</address>
</ip>
</Loopback>
</interface>
<control-plane/>
<login>
<on-success>
<log/>
</on-success>
</login>
<multilink>
<bundle-name xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-ppp">authenticated</bundle-name>
</multilink>
<redundancy/>
<spanning-tree>
<extend xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-spanning-tree">
<system-id/>
</extend>
</spanning-tree>
<subscriber>
<templating/>
</subscriber>
<crypto>
<pki xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-crypto">
<trustpoint>
<id>TP-self-signed-835353984</id>
<enrollment>
<selfsigned/>
</enrollment>
<revocation-check>none</revocation-check>
<rsakeypair>
<key-label>TP-self-signed-835353984</key-label>
</rsakeypair>
<subject-name>cn=IOS-Self-Signed-Certificate-835353984</subject-name>
</trustpoint>
<certificate>
<chain>
<name>TP-self-signed-835353984</name>
<certificate>
<serial>01</serial>
<certtype>self-signed</certtype>
</certificate>
</chain>
</certificate>
</pki>
</crypto>
<router>
<bgp xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-bgp">
<id>6</id>
<bgp>
<router-id>
<ip-id>10.10.30.6</ip-id>
</router-id>
</bgp>
<neighbor>
<id>10.10.30.5</id>
<remote-as>5</remote-as>
</neighbor>
</bgp>
</router>
<license>
<udi>
<pid>CSR1000V</pid>
<sn>9SVCRC7X9CJ</sn>
</udi>
</license>
<line>
<console>
<first>0</first>
<exec-timeout>
<minutes>0</minutes>
<seconds>0</seconds>
</exec-timeout>
<logging>
<synchronous/>
</logging>
<privilege>
<level>
<number>15</number>
</level>
</privilege>
<stopbits>1</stopbits>
<transport>
<output>
<output>none</output>
</output>
</transport>
</console>
<vty>
<first>0</first>
<last>4</last>
<exec-timeout>
<minutes>0</minutes>
<seconds>0</seconds>
</exec-timeout>
<logging>
<synchronous/>
</logging>
<login>
<local/>
</login>
<privilege>
<level>
<number>15</number>
</level>
</privilege>
<transport>
<input>
<input>telnet</input>
<input>ssh</input>
</input>
</transport>
</vty>
</line>
<diagnostic xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-diagnostics">
<bootup>
<level>minimal</level>
</bootup>
</diagnostic>
</native>
<licensing xmlns="http://cisco.com/ns/yang/cisco-smart-license">
<config>
<enable>false</enable>
<privacy>
<hostname>false</hostname>
<version>false</version>
</privacy>
<utility>
<utility-enable>false</utility-enable>
</utility>
</config>
</licensing>
<bgp xmlns="http://openconfig.net/yang/bgp">
<global>
<config>
<as>65001</as>
</config>
<afi-safis>
<afi-safi>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<config>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<enabled>true</enabled>
</config>
</afi-safi>
</afi-safis>
</global>
<neighbors>
<neighbor>
<neighbor-address>2001:db8:e:1::1</neighbor-address>
<config>
<peer-group>EBGP</peer-group>
<neighbor-address>2001:db8:e:1::1</neighbor-address>
</config>
</neighbor>
</neighbors>
<peer-groups>
<peer-group>
<peer-group-name>EBGP</peer-group-name>
<config>
<peer-group-name>EBGP</peer-group-name>
<peer-as>65002</peer-as>
</config>
<transport>
<config>
<local-address>Loopback0</local-address>
</config>
</transport>
<afi-safis>
<afi-safi>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<config>
<afi-safi-name xmlns:oc-bgp-types="http://openconfig.net/yang/bgp-types">oc-bgp-types:IPV6_UNICAST</afi-safi-name>
<enabled>true</enabled>
</config>
</afi-safi>
</afi-safis>
</peer-group>
</peer-groups>
</bgp>
<interfaces xmlns="http://openconfig.net/yang/interfaces">
<interface>
<name>GigabitEthernet1</name>
<config>
<name>GigabitEthernet1</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<description>DON'T TOUCH ME</description>
<enabled>true</enabled>
</config>
<subinterfaces>
<subinterface>
<index>0</index>
<config>
<index>0</index>
<description>DON'T TOUCH ME</description>
<enabled>true</enabled>
</config>
<ipv4 xmlns="http://openconfig.net/yang/interfaces/ip">
<addresses>
<address>
<ip>10.10.30.6</ip>
<config>
<ip>10.10.30.6</ip>
<prefix-length>24</prefix-length>
</config>
</address>
</addresses>
</ipv4>
<ipv6 xmlns="http://openconfig.net/yang/interfaces/ip">
<config>
<enabled>false</enabled>
</config>
</ipv6>
</subinterface>
</subinterfaces>
<ethernet xmlns="http://openconfig.net/yang/interfaces/ethernet">
<config>
<mac-address>50:00:00:08:00:00</mac-address>
<auto-negotiate>true</auto-negotiate>
</config>
</ethernet>
</interface>
<interface>
<name>GigabitEthernet2</name>
<config>
<name>GigabitEthernet2</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<mtu>9192</mtu>
<description>Configured via ydk</description>
<enabled>true</enabled>
</config>
<subinterfaces>
<subinterface>
<index>0</index>
<config>
<index>0</index>
<description>Configured via ydk</description>
<enabled>true</enabled>
</config>
<ipv4 xmlns="http://openconfig.net/yang/interfaces/ip">
<addresses>
<address>
<ip>172.16.1.0</ip>
<config>
<ip>172.16.1.0</ip>
<prefix-length>31</prefix-length>
</config>
</address>
</addresses>
</ipv4>
<ipv6 xmlns="http://openconfig.net/yang/interfaces/ip">
<addresses>
<rpc-error xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<error-type>application</error-type>
<error-tag>operation-failed</error-tag>
<error-severity>error</error-severity>
<error-message xml:lang="en">application protocol error</error-message>
<error-info>
<bad-element>address</bad-element>
</error-info>
</rpc-error>
</addresses>
<config>
<enabled>false</enabled>
</config>
</ipv6>
</subinterface>
</subinterfaces>
<ethernet xmlns="http://openconfig.net/yang/interfaces/ethernet">
<config>
<mac-address>50:00:00:08:00:01</mac-address>
<auto-negotiate>false</auto-negotiate>
<port-speed>SPEED_1GB</port-speed>
</config>
</ethernet>
</interface>
<interface>
<name>GigabitEthernet3</name>
<config>
<name>GigabitEthernet3</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<enabled>false</enabled>
</config>
<subinterfaces>
<subinterface>
<index>0</index>
<config>
<index>0</index>
<enabled>false</enabled>
</config>
<ipv6 xmlns="http://openconfig.net/yang/interfaces/ip">
<config>
<enabled>false</enabled>
</config>
</ipv6>
</subinterface>
</subinterfaces>
<ethernet xmlns="http://openconfig.net/yang/interfaces/ethernet">
<config>
<mac-address>50:00:00:08:00:02</mac-address>
<auto-negotiate>true</auto-negotiate>
</config>
</ethernet>
</interface>
<interface>
<name>GigabitEthernet4</name>
<config>
<name>GigabitEthernet4</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<enabled>false</enabled>
</config>
<subinterfaces>
<subinterface>
<index>0</index>
<config>
<index>0</index>
<enabled>false</enabled>
</config>
<ipv6 xmlns="http://openconfig.net/yang/interfaces/ip">
<config>
<enabled>false</enabled>
</config>
</ipv6>
</subinterface>
</subinterfaces>
<ethernet xmlns="http://openconfig.net/yang/interfaces/ethernet">
<config>
<mac-address>50:00:00:08:00:03</mac-address>
<auto-negotiate>true</auto-negotiate>
</config>
</ethernet>
</interface>
<interface>
<name>Loopback0</name>
<config>
<name>Loopback0</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:softwareLoopback</type>
<enabled>true</enabled>
</config>
<subinterfaces>
<subinterface>
<index>0</index>
<config>
<index>0</index>
<enabled>true</enabled>
</config>
<ipv4 xmlns="http://openconfig.net/yang/interfaces/ip">
<addresses>
<address>
<ip>1.1.1.6</ip>
<config>
<ip>1.1.1.6</ip>
<prefix-length>32</prefix-length>
</config>
</address>
</addresses>
</ipv4>
<ipv6 xmlns="http://openconfig.net/yang/interfaces/ip">
<config>
<enabled>false</enabled>
</config>
</ipv6>
</subinterface>
</subinterfaces>
</interface>
</interfaces>
<network-instances xmlns="http://openconfig.net/yang/network-instance">
<network-instance>
<name>default</name>
<config>
<name>default</name>
<type xmlns:oc-ni-types="http://openconfig.net/yang/network-instance-types">oc-ni-types:DEFAULT_INSTANCE</type>
<description>default-vrf [read-only]</description>
</config>
<tables>
<table>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:DIRECTLY_CONNECTED</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV4</address-family>
<config>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:DIRECTLY_CONNECTED</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV4</address-family>
</config>
</table>
<table>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:DIRECTLY_CONNECTED</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV6</address-family>
<config>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:DIRECTLY_CONNECTED</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV6</address-family>
</config>
</table>
<table>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:STATIC</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV4</address-family>
<config>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:STATIC</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV4</address-family>
</config>
</table>
<table>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:STATIC</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV6</address-family>
<config>
<protocol xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:STATIC</protocol>
<address-family xmlns:oc-types="http://openconfig.net/yang/openconfig-types">oc-types:IPV6</address-family>
</config>
</table>
</tables>
<protocols>
<protocol>
<identifier xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:BGP</identifier>
<name>6</name>
<config>
<identifier xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:BGP</identifier>
<name>6</name>
</config>
<bgp>
<global>
<config>
<as>6</as>
<router-id>10.10.30.6</router-id>
</config>
<graceful-restart>
<config>
<enabled>false</enabled>
</config>
</graceful-restart>
<route-selection-options>
<config>
<always-compare-med>false</always-compare-med>
<external-compare-router-id>false</external-compare-router-id>
</config>
</route-selection-options>
</global>
<neighbors>
<neighbor>
<neighbor-address>10.10.30.5</neighbor-address>
<config>
<neighbor-address>10.10.30.5</neighbor-address>
<peer-as>5</peer-as>
</config>
<timers>
<config>
<hold-time>180.0</hold-time>
<keepalive-interval>60.0</keepalive-interval>
</config>
</timers>
<ebgp-multihop>
<config>
<enabled>true</enabled>
</config>
</ebgp-multihop>
</neighbor>
</neighbors>
</bgp>
</protocol>
<protocol>
<identifier xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:STATIC</identifier>
<name>DEFAULT</name>
<config>
<identifier xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:STATIC</identifier>
<name>DEFAULT</name>
</config>
<static-routes>
<static>
<prefix>0.0.0.0/0</prefix>
<config>
<prefix>0.0.0.0/0</prefix>
</config>
<next-hops>
<next-hop>
<index>10.10.30.254</index>
<config>
<index>10.10.30.254</index>
<next-hop>10.10.30.254</next-hop>
</config>
</next-hop>
</next-hops>
</static>
</static-routes>
</protocol>
<protocol>
<identifier xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:DIRECTLY_CONNECTED</identifier>
<name>DEFAULT</name>
<config>
<identifier xmlns:oc-pol-types="http://openconfig.net/yang/policy-types">oc-pol-types:DIRECTLY_CONNECTED</identifier>
<name>DEFAULT</name>
</config>
</protocol>
</protocols>
</network-instance>
</network-instances>
<interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
<interface>
<name>GigabitEthernet1</name>
<description>DON'T TOUCH ME</description>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<enabled>true</enabled>
<ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip">
<address>
<ip>10.10.30.6</ip>
<netmask>255.255.255.0</netmask>
</address>
</ipv4>
<ipv6 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip"/>
</interface>
<interface>
<name>GigabitEthernet2</name>
<description>Configured via ydk</description>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<enabled>true</enabled>
<ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip">
<address>
<ip>172.16.1.0</ip>
<netmask>255.255.255.254</netmask>
</address>
</ipv4>
<ipv6 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip">
<rpc-error xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<error-type>application</error-type>
<error-tag>operation-failed</error-tag>
<error-severity>error</error-severity>
<error-message xml:lang="en">application protocol error</error-message>
<error-info>
<bad-element>address</bad-element>
</error-info>
</rpc-error>
</ipv6>
</interface>
<interface>
<name>GigabitEthernet3</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<enabled>false</enabled>
<ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip"/>
<ipv6 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip"/>
</interface>
<interface>
<name>GigabitEthernet4</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</type>
<enabled>false</enabled>
<ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip"/>
<ipv6 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip"/>
</interface>
<interface>
<name>Loopback0</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:softwareLoopback</type>
<enabled>true</enabled>
<ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip">
<address>
<ip>1.1.1.6</ip>
<netmask>255.255.255.255</netmask>
</address>
</ipv4>
<ipv6 xmlns="urn:ietf:params:xml:ns:yang:ietf-ip"/>
</interface>
</interfaces>
<routing xmlns="urn:ietf:params:xml:ns:yang:ietf-routing">
<routing-instance>
<name>default</name>
<description>default-vrf [read-only]</description>
<routing-protocols>
<routing-protocol>
<type>static</type>
<name>1</name>
<static-routes>
<ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing">
<route>
<destination-prefix>0.0.0.0/0</destination-prefix>
<next-hop>
<next-hop-address>10.10.30.254</next-hop-address>
</next-hop>
</route>
</ipv4>
</static-routes>
</routing-protocol>
</routing-protocols>
</routing-instance>
</routing>
</data>
</rpc-reply>So, you can see my manual BGP config in Native model and Openconfig config in Openconfig BGP model which is not displayed in the config on the device itself.
I understand it is not about YDK but do you know how it is processed on the device?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-09-2019 08:48 AM
It all depends on device capabilities to implement certain YANG models. From my personal experience I know that BGP can be configured only by using Cisco native models, but it can be partially read using openconfig models too. The main reason behind that concept is that BGP configuration on Cisco devices is much more complex than openconfig models can describe.
For further investigation on this subject please refer to specific router software documentation and/or Cisco TAC support.
Yan Gorelik
YDK Solutions
YDK Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-10-2019 05:01 AM
I wanted to experiment with CodecService and to transform received config to Python object via decode method:
import logging
from ydk.services import NetconfService, Datastore, CodecService
from ydk.providers import NetconfServiceProvider, CodecServiceProvider
logger = logging.getLogger('ydk')
logger.setLevel(logging.INFO)
handler = logging.StreamHandler()
formatter = logging.Formatter(("%(asctime)s - %(name)s - "
"%(levelname)s - %(message)s"))
handler.setFormatter(formatter)
logger.addHandler(handler)
DEVICES = {
'junos': {
'ip': '10.10.30.4',
'pass': 'Juniper'
},
'xr': {
'ip': '10.10.30.5',
'pass': 'admin'
},
'xe': {
'ip': '10.10.30.6',
'pass': 'admin'
}
}
if __name__ == '__main__':
device = DEVICES['xe']
provider = NetconfServiceProvider(
address=device['ip'],
port=830,
username='admin',
password=device['pass'],
protocol='ssh'
)
netconf = NetconfService()
config = netconf.get_config(provider, Datastore.running)
codec = CodecService()
pr = CodecServiceProvider(type='xml')
cfg = codec.decode(pr, config)
But after it gets RPC-Reply with config it fails:
...
<routing xmlns="urn:ietf:params:xml:ns:yang:ietf-routing">
<routing-instance>
<name>default</name>
<description>default-vrf [read-only]</description>
<routing-protocols>
<routing-protocol>
<type>static</type>
<name>1</name>
<static-routes>
<ipv4 xmlns="urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing">
<route>
<destination-prefix>0.0.0.0/0</destination-prefix>
<next-hop>
<next-hop-address>10.10.30.254</next-hop-address>
</next-hop>
</route>
</ipv4>
</static-routes>
</routing-protocol>
</routing-protocols>
</routing-instance>
</routing>
</data>
</rpc-reply>
Traceback (most recent call last):
File "test.py", line 41, in <module>
config = netconf.get_config(provider, Datastore.running)
File "/usr/local/lib/python3.6/dist-packages/ydk/services/netconf_service.py", line 108, in get_config
return _ns_get(provider, source, read_filter, self._ns.get_config)
File "/usr/local/lib/python3.6/dist-packages/ydk/services/netconf_service.py", line 153, in _ns_get
return _read_entities(provider, get_config=is_config)
File "/usr/lib/python3.6/contextlib.py", line 99, in __exit__
self.gen.throw(type, value, traceback)
File "/usr/local/lib/python3.6/dist-packages/ydk/errors/error_handler.py", line 82, in handle_runtime_error
_raise(_exc)
File "/usr/local/lib/python3.6/dist-packages/ydk/errors/error_handler.py", line 54, in _raise
exec("raise exc from None")
File "<string>", line 1, in <module>
ydk.errors.YServiceProviderError: application protocol error
2019-12-10 16:00:44,024 - ydk - INFO - Disconnected from deviceWhat is wrong with this one?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-10-2019 01:36 PM - edited 12-10-2019 02:33 PM
Could you please rerun this script with logging level DEBUG and attach the log to the post so I could understand why the YDK failed to get XE configuration.
Note. Because the filter for the NetconfService.get_config() is not specified, the YDK attempts to retrieve full configuration of the device. The returned result in this case is class Config instance, which is alias of EntityCollection class.
I do not understand, why later on you try to call codec.decode(), which expects as a parameter string value of payload. I guess you wanted to get result as XML and then print it. In this case the last operator should be:
xml_list = codec.encode(pr, config.entities(), pretty=True)
print("\nGOT DEVICE CONFIGURATION:\n%s" % '\n'.join(xml_list))
I executed such script on CiscoDevNet IOS XE sandbox router and got it working just fine (see attached log file)
Yan Gorelik
YDK Solutions
YDK Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 12:26 AM
Yes. This works fine for me too.
In fact, I was trying to do two things:
1) Get XML representation of device config for every model it sends (which you told me how to do)
2) Create Python objects for every XML received, which I still wonder how to do. I thought decode can do this for me
In fact, I was trying to do two things:
1) Get XML representation of device config for every model it sends (which you told me how to do)
2) Create Python objects for every XML received, which I still wonder how to do. I thought decode can do this for me
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 10:50 AM
Kirill
You get all python objects in the line:
config = netconf.get_config(provider, Datastore.running)
But they are placed into Config class, which is EntityCollection instance. Please check its API and use examples here. In order to get list of entities (python objects) simply run:
list_of_entities = config.entities()
Yan Gorelik
YDK Solutions
YDK Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 11:58 PM
Aha, got it. I've just looked into this object and I could discover these objects. This is really convenient.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 01:08 AM
But with XR it didn't work out.
The script
import logging
from ydk.services import NetconfService, Datastore, CodecService
from ydk.providers import NetconfServiceProvider, CodecServiceProvider
logger = logging.getLogger('ydk')
logger.setLevel(logging.DEBUG)
handler = logging.StreamHandler()
formatter = logging.Formatter(("%(asctime)s - %(name)s - "
"%(levelname)s - %(message)s"))
handler.setFormatter(formatter)
logger.addHandler(handler)
DEVICES = {
'junos': {
'ip': '10.10.30.4',
'pass': 'Juniper'
},
'xr': {
'ip': '10.10.30.5',
'pass': 'admin'
},
'xe': {
'ip': '10.10.30.6',
'pass': 'admin'
}
}
if __name__ == '__main__':
device = DEVICES['xr']
provider = NetconfServiceProvider(
address=device['ip'],
port=830,
username='admin',
password=device['pass'],
protocol='ssh'
)
netconf = NetconfService()
config = netconf.get_config(provider, Datastore.running)
codec = CodecService()
pr = CodecServiceProvider(type='xml')
xml_list = codec.encode(pr, config.entities(), pretty=True)
print('\nGOT DEVICE CONFIGURATION:\n{}'.format('\n'.join(xml_list)))DEBUG is attached.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 11:15 AM
The YDK did receive device configuration, but then failed to convert it to entities due to error in this part of reply:
<vm xmlns="http://www.cisco.com/ns/yang/Cisco-IOS-XR-sysadmin-vm">
<config>
<memory>
<admin>0</admin>
<rp>0</rp>
<lc>0</lc>
</memory>
<cpu>
<assign/>
</cpu>
</config>
</vm>
In particular, it did not like that 'assign' has empty string value. However the model requires it to have some string value, which complies with the pattern:
ydk.errors.YModelError: Value "" does not satisfy the constraint "0(-[0-9]+)?/[0-9]+(-[0-9]+)?" (range, length, or pattern). Path: /Cisco-IOS-XR-sysadmin-vm:vm/config/cpu/assign
Most likely it is an error in the pattern (model error), but it could be a bug in Netconf server on the device, which should not include the 'assign' node into reply.
I am not sure if there is clean workaround for this issue in YDK. One kludgy way - manually change model in device repository in the way that it allows empty string for the 'assign' node.
Yan Gorelik
YDK Solutions
YDK Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 01:13 AM
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2019 03:20 PM
Opened a bug YDK fails to decode RPC received from Juniper device.
Yan Gorelik
YDK Solutions
YDK Solutions
Getting Started
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Customers Also Viewed These Support Documents