!  The default startup configuration file for Cisco Configuration Professional (Cisco CP)
!  DO NOT modify this file; it is required by Cisco CP as is for factory defaults
!  Version 1.0
!
hostname yourname
!
logging buffered 51200 warnings
!
username cisco privilege 15 secret 0 cisco
username cisco privilege 15 one-time secret 0 cisco
!
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
   import all
   network 10.10.10.0 255.255.255.128
   default-router 10.10.10.1
   lease 0 2
!  
no ip domain lookup
ip domain-name yourdomain.com
!
!
interface Vlan1
 description $ETH_LAN$
 ip address 10.10.10.1 255.255.255.128
 ip tcp adjust-mss 1452 
!
ip http server
ip http access-class 23
ip http secure-server
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.127
!
banner exec ^
% Password expiration warning.
-----------------------------------------------------------------------
 
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for  one-time use. If you have 
already used the username "cisco" to login to the router and your IOS image 
supports the "one-time" user option, then this username has already expired. 
You will not be able to login to the router with this username after you exit 
this session.
 
It is strongly suggested that you create a new username with a privilege level 
of 15 using the following command.
 
username <myuser> privilege 15 secret 0 <mypassword>
 
Replace <myuser> and <mypassword> with the username and password you 
want to use.
 
-----------------------------------------------------------------------
^
banner login ^
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the 
password "cisco". These default credentials have a privilege level of 15.
 
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want 
to use. 

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL 
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
 
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp 
-----------------------------------------------------------------------
^
!
no cdp run
!
!
line con 0
 login local
line vty 0 4
 access-class 23 in
 privilege level 15
 login local
 transport input telnet
 transport input telnet ssh
line vty 5 15
 access-class 23 in
 privilege level 15
 login local
 transport input telnet
 transport input telnet ssh
!
!  End of Cisco CP default config file
end