Greetings,I have a client with a SPA8000 latest firmware version having the following issues.This is a first time implementacion, and he is registering to his own PBX IWATSU.He also has a VPN tunnel from a remote location to where the PBX is at. When...

Greetings of the day:Hello, I have a client who has three WAP4410N  Firmware V 1.0.12 and Hardware Rev.12 all connected to an RVS4000 as a gateway, when using wireless clients to access wirelessly the management interface of all three only two open, ...

Greeting,I have a client who plugs his B10 Blocker into any port of a CE500 Switch and after 15-20 Minutes the port on the CE500 Switch shuts down, I told customer that is sounds like some sort of port security issue, however I am unsure and wonder i...

I have a client with 3 different Wap4410n in three different locations that experience the same issue, when doing a large file transffer they all fail, the signal gets locked up, the only way for it to come back on is to manually power cycle the devi...

Customer has three of these SVR3000 devices for other clients, they are using PHM1200 Ip phones, on the display of the phone it states that they cannot make outbound calls but in actuality they can make calls, also when trying to do call forwarding t...