取消
显示结果 
搜索替代 
您的意思是: 
cancel
10118
查看次数
0
有帮助
9
回复

VTP 问题

savi_bj
Level 1
Level 1
请问各位:
接入层是 WS-C2960L-24PS-LL 核心是3850-24XS ,核心是 sever 模式 接入是 client 模式 不能同步?什么原因?
各位同仁给看看,排除域名和密码的问题!
ay 23 10:31:27.817: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi0/8: Power Controller reports power Imax error detected
SW-B09(config)#do show vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : ACL_BX
VTP Pruning Mode : Enabled
VTP Traps Generation : Disabled
Device ID : 00bf.7790.7300
Configuration last modified by 10.10.200.134 at 5-23-18 09:52:25
Feature VLAN:
--------------
VTP Operating Mode : Client
Maximum VLANs supported locally : 64
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0xBD 0xD6 0x6E 0x7E 0xCD 0xC9 0x5C 0x23
0x50 0x9A 0xB7 0x31 0xA4 0x68 0xB1 0x12
SW-B09(config)#do show vtp status
May 23 10:31:37.817: %ILPOWER-7-DETECT: Interface Gi0/8: Power Device detected: IEEE PD
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : ACL_BX
VTP Pruning Mode : Enabled
VTP Traps Generation : Disabled
Device ID : 00bf.7790.7300
Configuration last modified by 10.10.200.134 at 5-23-18 09:52:25
Feature VLAN:
--------------
VTP Operating Mode : Client
Maximum VLANs supported locally : 64
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0xBD 0xD6 0x6E 0x7E 0xCD 0xC9 0x5C 0x23
0x50 0x9A 0xB7 0x31 0xA4 0x68 0xB1 0x12
SW-B09(config)#
May 23 10:31:37.817: %ILPOWER-5-POWER_GRANTED: Interface Gi0/8: Power granteddo show vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : ACL_BX
VTP Pruning Mode : Enabled
VTP Traps Generation : Disabled
Device ID : 00bf.7790.7300
Configuration last modified by 10.10.200.134 at 5-23-18 09:52:25
Feature VLAN:
--------------
VTP Operating Mode : Client
Maximum VLANs supported locally : 64
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0xBD 0xD6 0x6E 0x7E 0xCD 0xC9 0x5C 0x23
0x50 0x9A 0xB7 0x31 0xA4 0x68 0xB1 0x12
SW-B09(config)#do show vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : ACL_BX
VTP Pruning Mode : Enabled
VTP Traps Generation : Disabled
Device ID : 00bf.7790.7300
Configuration last modified by 10.10.200.134 at 5-23-18 09:52:25
Feature VLAN:
--------------
VTP Operating Mode : Client
Maximum VLANs supported locally : 64
Number of existing VLANs : 7
Configuration Revision
May 23 10:31:42.836: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi0/8: Power Controller reports power Imax error detected : 0
MD5 digest : 0xBD 0xD6 0x6E 0x7E 0xCD 0xC9 0x5C 0x23
0x50 0x9A 0xB7 0x31 0xA4 0x68 0xB1 0x12
SW-B09(config)#do show vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : ACL_BX
VTP Pruning Mode : Enabled
VTP Traps Generation : Disabled
Device ID : 00bf.7790.7300
Configuration last modified by 10.10.200.134 at 5-23-18 09:52:25
Feature VLAN:
--------------
VTP Operating Mode : Client
Maximum VLANs supported locally : 64
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0xBD 0xD6 0x6E 0x7E 0xCD 0xC9 0x5C 0x23
0x50 0x9A 0xB7 0x31 0xA4 0x68 0xB1 0x12
SW-B09(config)#do show vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : ACL_BX
VTP Pruning Mode : Enabled
VTP Traps Generation : Disabled
Device ID : 00bf.7790.7300
Configuration last modified by 10.10.200.134 at 5-23-18 09:52:25
Feature VLAN:
--------------
VTP Operating Mode : Client
Maximum VLANs supported locally : 64
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0xBD 0xD6 0x6E 0x7E 0xCD 0xC9 0x5C 0x23
0x50 0x9A 0xB7 0x31 0xA4 0x68 0xB1 0x12
SW-B09(config)#do show vtp status
VTP Version capable : 1 to 3
VTP version running : 2
VTP Domain Name : ACL_BX
VTP Pruning Mode : Enabled
VTP Traps Generation : Disabled
Device ID : 00bf.7790.7300
Configuration last modified by 10.10.200.134 at 5-23-18 09:52:25
Feature VLAN:
--------------
VTP Operating Mode : Client
Maximum VLANs supported locally : 64
Number of existing VLANs : 7
Configuration Revision : 0
MD5 digest : 0xBD 0xD6 0x6E 0x7E 0xCD 0xC9 0x5C 0x23
0x50 0x9A 0xB7 0x31 0xA4 0x68 0xB1 0x12
SW-B09(config)#
May 23 10:31:52.836: %ILPOWER-7-DETECT: Interface Gi0/8: Power Device detected: IEEE PD
SW-B09(config)#
May 23 10:31:52.836: %ILPOWER-5-POWER_GRANTED: Interface Gi0/8: Power granted
9 条回复9

SMG-SH
Level 7
Level 7
看上去没问题 Configuration Revision server的也最大

ilay
VIP
VIP
vtp client 模式操作的时候有一点需要注意下。
不能在任何模式(transparent、server、off)下创建vlan 后再更改模式为client,一旦在设置vtp mode client前,交换机上有任何非系统生成的vlan,交换机都不会再去跟server同步vlan信息。
正确的做法:一台新交换机(或初始配置交换机)登录进去之后首先配置vtp的信息。然后再去设置其他的参数。这样基本不会出现vlan同步的问题。
另:一台正常同步的交换机由server模式更改为client不会影响其后续同步。
再回来看你所说的问题,建议备份配置之后,然后no掉所有vlan ,然后删除vlan.dat 后重启交换机,重启后再配置vtp,检查一下是否能正常同步。

bo chen
Spotlight
Spotlight
client和server互联是否两端都为trunk接口,client和server的VTP version是否一致。

Jim—Jin
Cisco Employee
Cisco Employee
我看你VTP pruning是enable的,show interface trunk看下是不是把你想添加的vlan给干掉了。
如果说没有的话,可以尝试在接口抓包,看看有没有收到正常的VTP包。
没收到的话,查一查server, 收到了的话,查一下client。

Jim—Jin
Cisco Employee
Cisco Employee
https://www.cisco.com/c/en/us/support/docs/lan-switching/vtp/98155-tshoot-vlan.html
这是troubleshooting VTP问题的guide,可以参考一下

suzhouxiaoniu
Spotlight
Spotlight
SMG-SH 发表于 2018-5-23 21:20
看上去没问题 Configuration Revision server的也最大

服务器的配置在那?

suzhouxiaoniu
Spotlight
Spotlight
新创建的VLAN是否同步?服务器的配置呢,我怎么从上到下看到的都是B09的VTP显示呢?全是SW-B09(config)#do show vtp status ,而且修订号都是0

liuyj
Level 1
Level 1
你看你下互联的接口是不是没有放过来trunk的vlan

savi_bj
Level 1
Level 1
找到原因了,sever 上的VLAN 数量超过了 client的能支持的最大数量,谢谢大家!
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接