WS-C4548E 重启报错？

[savi_bj]

Apr 7 03:03:07.683: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Apr 7 03:03:09.651: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 1 (WS-C4948E S/N: CAT1712S2FQ Hw: 2.0) is online
*Apr 7 03:03:10.095: %SYS-5-CONFIG_I: Configured from memory by console
*Apr 7 03:03:10.259: %SYS-5-RESTART: System restarted --
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 15.1(2)SG, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 05-Dec-12 05:38 by prod_rel_team
*Apr 7 03:07:30.719: %SYS-5-CONFIG_I: Configured from console by console
Queued messages:
*Apr 7 03:11:09.335: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Apr 7 03:11:08.703: %C4K_SWITCHINGENGINEMAN-4-VFERMINTERRUPT: VFE RM retMemParErr interrupt. valid: 1 addr: 0x141F9 data[0]: 0x2 data[1]: 0xFFFFF1 parity: 0x0
*Apr 7 03:11:09.335: %C4K_SWITCHINGENGINEMAN-3-VFERMTOOMANYPARITYERRORS: VFE RM module sees too many retMemParErr errors

[one-time]

静候小伙伴的回复！:)

[savi_bj]

是不是软件升级 的问题啊？

[Lei Zhang]

您好！
建议您还是开case，联系Cisco TAC进一步troubleshooting。
谢谢！

[huoran1234]

估计硬件问题的可能性比较大。。