取消
显示结果 
搜索替代 
您的意思是: 
cancel
1734
查看次数
0
有帮助
5
回复

无线WLC5508 外部PORTAL认证失败

songliang
Level 1
Level 1

5508无线控制器配置外部porttal认证对接AD活动目录,通过抓包看到认证协议使用的是CHAP,并不是PAP,导致认证失败。请问如何修改WLC认证为PAP协议?版本是8.5.161

 

 

2 个已接受解答

已接受的解答

You can try to turn it on here.

WLC can authenticate users to RADIUS server with Password Authentication Protocol (PAP), Challenge Handshake Authentication Protocol (CHAP) or EAP-MD5 (Message Digest5). This is a global parameter and is configurable from GUI or CLI:

From GUI: navigate to Controller > Web RADIUS Authentication

From CLI: enter config custom-web RADIUSauth <pap|chap|md5chap>

Note: The NAC guest server only uses PAP.

QQ图片20211224161131.png

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

在原帖中查看解决方案

I think this is certainly supported. The attached configuration file is release 7.0.116, you can refer to it.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

在原帖中查看解决方案

5 条回复5

You can try to turn it on here.

WLC can authenticate users to RADIUS server with Password Authentication Protocol (PAP), Challenge Handshake Authentication Protocol (CHAP) or EAP-MD5 (Message Digest5). This is a global parameter and is configurable from GUI or CLI:

From GUI: navigate to Controller > Web RADIUS Authentication

From CLI: enter config custom-web RADIUSauth <pap|chap|md5chap>

Note: The NAC guest server only uses PAP.

QQ图片20211224161131.png

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

I have another question. wlc7.0version support external server (portal server and radius server) web-auth? Is there a configuration guide?

 

I think this is certainly supported. The attached configuration file is release 7.0.116, you can refer to it.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

Ok,Thanks!

I changed the configuration, but it still shows CHAP protocol by capturing data packets.

入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接