4805
查看次数
0
有帮助
8
回复
AP一直亮白灯
8 条回复8
这是AP2702的LED状态灯参考状态:
您的这种状态,有无检查过电源供电情况?POE和电源注入器都试过了吗?Console都无输出,如果都测试了,我觉得应该RMA了。{:2_26:}
Table 1 LED Status Indications
Message Type | Status LED | Message Meaning |
Boot loader status sequence | Blinking green | DRAM memory test in progress |
DRAM memory test OK | ||
Board initialization in progress | ||
Initializing FLASH file system | ||
FLASH memory test OK | ||
Initializing Ethernet | ||
Ethernet OK | ||
Starting Cisco IOS | ||
Initialization successful | ||
Association status | Green | Normal operating condition, but no wireless client associated |
Blue | Normal operating condition, at least one wireless client association | |
Operating status | Blinking blue | Software upgrade in progress |
Cycling through green, red, and off | Discovery/join process in progress | |
Rapidly cycling through blue, green, and red | Access point location command invoked | |
Blinking red | Ethernet link not operational | |
Boot loader warnings | Blinking blue | Configuration recovery in progress (MODE button pushed for 2 to 3 seconds) |
Red | Ethernet failure or image recovery (MODE button pushed for 20 to 30 seconds) | |
Blinking green | Image recovery in progress (MODE button released) | |
Boot loader errors | Red | DRAM memory test failure |
Blinking red and blue | FLASH file system failure | |
Blinking red and off | Environment variable failure | |
Bad MAC address | ||
Ethernet failure during image recovery | ||
Boot environment failure | ||
No Cisco image file | ||
Boot failure | ||
Cisco IOS errors | Red | Software failure; try disconnecting and reconnecting unit power |
Cycling through blue, green, red, and off | General warning; insufficient inline power |
您的这种状态,有无检查过电源供电情况?POE和电源注入器都试过了吗?Console都无输出,如果都测试了,我觉得应该RMA了。{:2_26:}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !
