we are trying to setup ACI lab. we have 3 x N9K-C9372PX. which APIC should we buy for lab? can we install APIC on VM or do we need saperate APIC controller server?
we are trying to setup ACI lab. we have 3 x N9K-C9372PX. which APIC should we buy for lab? can we install APIC on VM or do we need saperate APIC controller server?
Hello, I am trying do something simple - just to create an object (tenant, ANP, EPG, etc.) using python requests. I am wondering what I do wrong:( My GET requests are working fine. Considering that I have already successful login/cookies, my co...
Hi, If the ACI fabric receives the same route through two different border leafs using two different protocol eBGP and OSPF, how does the non border leafs decide to take which path. Link to any documentation would be really helpful Thank you in ...
I have an EPG with tagged static ports. I want to add untagged static ports however i get an error that all ports should be either tagged or untagged. If I create a second EPG, associate it to the same Bridge Domain, and put in it the untagged ports...
I have one Nexus 7k, vlan 200 SVI ip 192.168.1.1, it have two ebgp neighbor 192.168.1.2 and 192.168.1.3. (both vlan encap 200 in ACI, bgp peer connectivity profile , node profile and BGP interface profile are defined). my Nexus expected to receive ...
Is there a migration path from two brownfield standalone aci fabrics to multi-pod or multi-site?
I have the following problem: There are two separate DC's with a separate ACI fabric running in each DC. Any traffic (such as data, heartbeat, replication, etc) between the two DC's goes over a SDH/DWDM via EoMPLS. Any congestion or failure on the lo...
Hi, I have configured a new static L3OUT from which I have added a few subnets, 64/65/66.0/24. I can see all 3 static route entries in the correct vrf routing table from the cli on the leaf (Nexs 9000). I can iping to all but one of the subnets (6...
when we create a BD, there are different kinds of flooding, ARP flooding and L2 unknown unicast flooding, are they the same? if I choose arp flooding, do i need to select L2 unknown unicast flooding? or I can leave it as hardware proxy? by default ...
I have one switch profile, from leaf switch 0001 to 0004, then I associate two interface port selector, A is from port 1/1 to 1/10, selector B is port 1/20 to 1/22 for port selector A, i enter 1/1-1/10, then it display as 1/1/10 in switch profile, is...
Hello, Can an Endpoint connected to a leaf of POD1 and to a leaf of POD2 aggregate these two links in a regular LACP channel?
Hello All, I'm trying to get a better picture of VXLAN packet flow and could you please help me with the following questions on Nexus 9K platform switches: How are VXLAN ID's allocated? If it is dynamic and what would be the formula for a new VXLAN? ...
Dear Community, I am seeing a problem when comparing snapshots. Snapshot comparison works well when done for Tenant but doles out an error while comparing snapshots at Fabric level. The APIC is at 1.3 (we are planning for upgrade soon), but as o...
Hi, We're playing around with AVS on blades within an UCS chassis. The UCS chassis is connected from it's IOM to the FIs and both FIs have VPC configured to two of the leaves of the ACI fabric. vCenter is running on a physical hyperV domain with an V...
previously I have one online vmm controller, now someone delete the controller(vmm domain is not deleted), in vcenter, two port group has error sign, and I right click dvs, but remove submenu is greyed out, i go to apic and recreate vmm controller, a...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-29-2024 07:13 AM | ||
04-26-2024 10:27 AM | ||
04-22-2024 03:41 AM | ||
04-17-2024 06:22 AM | ||
04-04-2024 03:57 AM |