Join the ACI conversation. Jump into this space for access to peers and industry experts. You’ll find the latest updates, helpful resources, and assistance when you need it.
Hello,
If we build a local port-channel to ASA firewall from ACI Leaf and then use sub-interfaces of this Port-channel on ASA as interfaces with different security levels.
Where should we place gateway ip address for the each EPG connected to these ...
Team,
need one help
I was asked to check if L2 IGMP querier was enabled or not on Leaf switch ports where ESXis are connected.
could someone confirm if IGMP querier is enabled by default on ACI leaf switches if not, how do we enable.
Thanks in a...
Here is what I am trying to do:
I would like APIC and Vcenter to communicate via in band management. I don't want to put vCenter in the mgmt tenant, I would rather have its own tenant and then export a contract to be consume by the node mgmt epg. Wil...
Dear All ,
We have 3 node APIC Cluster and its working fine .But one of the APIC mode goes down and claimed for RAM .We got the RMA APIC node and trying to add this node into the Cluster .
Please assist me how can I add this RMA APIC node into...
I am integrating a Nutanix solution onto ACI. I have 2x leaf, 2x spines. Nutanix is connecting its 2x 10GE NICs into the Leaf switches. The NICs aren't using port-channel/vPC and are host-based load-balancing (i.e. 2x trunk interfaces separate to one...
Folks, we are designing Transit routing for a Tenant in the Fabric. It has 2 x L3 outs, one to its internal network over a mpls connection and the other is to it`s virtual-private-cloud in AWS. They would be part of the same VRF, but do we need to cr...
Hello,
i have a Strange request and i would like to get an advice about it.
I have implemented a Dual Site ACI Fabric : DCI is a back to back (vpc) via DWDM.
The question from my Customer is : is it possible to establish a L2TP tunnel between a VRF...
Hello,
We have a firewall connected to a switch. We have a problem with one of our servers attempting to talk to another server connected to the same switch. For quite some time we had no problems until suddenly about two months ago, they started...
It's come to my attention today that AEP's defined in the GUI are not showing up in the APIC running config.
How would the GUI handle CLI configuration that would normally result from explicit AEP config....
Or conversely, without the ability to ...
I tried getting a http/https connection to the device using "https://10.29.198.63/api/aaaLogin.json" and passing username and password as json object{ "aaaUser" : { "attributes" : { "name" : "admin", "pwd" : "C!sc0123" } }}This is n...
What EPGs are assigned to the port that is connected to my device? This is a question I get from time to time, but I cannot find this information anywhere in the ACI GUI. This question would come up for verification or troubleshooting purposes for ...
We are moving to ACI in network mode, and have built and configured our fabric in the lab. We are now ready to move the entire setup to the datacenter, and are looking for some documentation on how to gracefully shut down the fabric without the data...
