Good Morning,I have a Cisco ACI in 5.2 version in my LAB with a customer tenant configured. I need make some changes in bridge domain configuration to configure subnet ip address and associate it to outside L3. The customer has 4.2 version and I´ve c...
Forum Posts
Hello everyone, I'm trying to install Multi Domain Manager from the Cisco DC App Center: https://dcappcenter.cisco.com/multi-domain-manager.html but got an error after I upload the app on the APIC : Failed to install application Multi Domain Manager....
Hello Community, I created a small ACI Lab and finally I found an old APIC-M2.According to the BIOS, the TPM module is owned.However, if I start the installation of the APIC, the installation fails.As soon as I disable the TPM and install version 4.0...
Hi experts, We have an issue reported by server team ,they observed some packet drops and delay in reaching the destination server (Tx drops on the tunnel interface) Source : 172.X.x.25Destination : 172.X.x.35 In this case how do we check from N...
Hi Trying to set up generic Syslog on MSO version 3.1(1g) and following document - https://www.cisco.com/c/en/us/td/docs/dcn/mso/3x/configuration/cisco-aci-multi-site-configuration-guide-311.pdf Screenshots on page 83 don't match the GUI on MSO. The...
Hi Experts , Do we configure QOS in ACL LEAF switches ?How do we check if QOS is configured on the leaf switch ? How do we check the running config for interface APIC GUI ?
Hi all and nice to meet you.I have some ask/doubt for my deployment where is necessary deploy a single couple of FW CheckPoint with one node active on site1 and node standby on site2 (this geocluster throught and dedicated BD layer 2 streched working...
We were in the middle of uploading the APIC Controller .iso file in prep to update to latest version and noticed on the node we were uploading the .iso file to repository got to 95% full and complaining. So we stopped the upload process. What actuall...
Hi Folks,Is it possible to have a Null Route on ACI?Warm Regards,KT
Resolved! Nexus Dashboard and vcenter 7
Checking to confirm the Nexus Dashboard VM is supported with vcenter 7.0. Per the hardware install guide, it is not in Data mode and no vcenter is support in app mode. If supported, can the doc be updated. https://www.cisco.com/c/en/us/td/docs/dcn...
Resolved! ACI and Netflow
Can an ACI fabric export netflow data and if so are there any configuration guides/examples?
Hi Everyone, I am deploying a Multipod datacenter site A and Site B, That one is designed for different customers so my question is if I have a IPN to extend L2 between on both side. How would I differentiate replication traffic flow for different c...
Hi Experts , Can we perform ping , traceroute , telnet from APIC GUI ? What all actions cannot be done via APIC GUI ? but required CLI access to do so ?
Hi All I deployed APIC controller version 5.1 as virtual machines ,however nigher cant login to the console (invalid password) nor can browse the admin page . please see attached for more details . anyone know what the problem is ? Tried to Deploy v...
Resolved! Does acsim work on workstation?
The OVA parts were merged into one using the command "type acsim-5.2-3f_part* > acsim-5.2-3f.ova".The merged OVA file is loaded onto workstation , but it fails as a result.Does acsim work on workstation??
