Hi all,
This is going to be a basic question, but I've come across a Cisco ACE that I've been asked to migrate the load balancing configuration off onto an alternative ADC.
I have the configuration but it contains two entries for the same IP/Port information. Is there a precedence if I have two entries with the same IP/Port, or do I misunderstand the logic, and this is an ACE example of a Content Switch?
E.g.: In this example, will traffic get passed to FARM1 or FARM2 backend servers if you hit 192.168.1.22:443 ? (Appreciate the probe and ssl-proxy service is missing out of the config).
serverfarm host FARM1
probe PROBE1
rserver SERVER1 8000
inservice
serverfarm host FARM2
probe PROBE2
rserver SERVER3 8000
inservice
action-list type modify http HTTP_ACTION1
ssl url rewrite location "www\.sta\.domain\.co\.uk"
action-list type modify http HTTP_ACTION2
ssl url rewrite location "docs\.sta\.domain\.co\.uk"
class-map match-all FARM1
2 match virtual-address 192.168.1.22 tcp eq https
class-map match-all FARM2
2 match virtual-address 192.168.1.22 tcp eq https
policy-map type loadbalance first-match FARM1
class default-compression-exclusion-mime-type
serverfarm FARM1
compress default-method gzip
class class-default
serverfarm FARM1
compress default-method gzip
action HTTP_ACTION1
policy-map type loadbalance first-match FARM2
class default-compression-exclusion-mime-type
serverfarm FARM2
compress default-method gzip
class class-default
serverfarm FARM2
compress default-method gzip
action HTTP_ACTION2
class FARM1
loadbalance vip inservice
loadbalance policy FARM1
loadbalance vip icmp-reply active
appl-parameter http advanced-options PERSISTANCE
ssl-proxy server SSL_FARM1
class FARM2
loadbalance vip inservice
loadbalance policy FARM2
loadbalance vip icmp-reply active
appl-parameter http advanced-options PERSISTANCE
ssl-proxy server SSL_FARM2
Any help or pointers would be really helpful!
Thanks very much