Webcast Layer 3 Multicast: Security and Best Practices
(Live Webcast Tuesday November 28, 2017 at 11 am Pacific/ 2 pm Eastern / 7 pm Paris)
In this event, you will learn more about Layer 3 multicast and the best practices to identify possible threats and take security measures. The session provides an overview of basic multicast, the best security practices for use of this technology, and recommendations for how to configure an auto rendezvous point (RP) and Bootstrap (BSR) in multicast protocols, with particular focus on RP distribution methods. This event includes a live demonstration of Layer 3 multicast technology.
Agenda • Introduction • Multicast basics • Auto RP, BSR (RP distribution methods) • Possible threats and security measures • Demonstration
Luis Espejel is the Telecommunications Manager of IENova, an Oil & Gas company. Currently he works with Cisco IOS® and Cisco IOS XE platforms, and NX to some extent. He has also worked as a Senior Engineer with the Routing Protocols team in Cisco’s Global Technical Assistance Center (TAC), as a Network and Telecommunications Manager for GM’s Mexico subsidiary, and in the Engineering Department for Axtel, a major Internet Service Provider. Luis holds an Electronics and Communication degree and postgraduate degrees, one in marketing and one in telecommunications. He has several certifications such as Google Power Search, ITIL foundations, Certified Ethical hacker, CCNA in DC, Cybersecurity Specialist, and a CCIE in R&S (#52804) among others.
David Ramirez is a Network Engineer at Astra Zenca pharmaceutical, where he works on IWAN implementation projects and LAN refresh and migrations to 10 Gig Fibre ring network. Previously he worked as a Support Engineer for Cisco’s TAC Routing Protocols team, as a Deployment Engineer of Value Added Services (Voicemail and Multimedia Messaging Services for Mobile Telephony), and as a Telecom Associate Engineer at Getronics where he provided routing and switching support to several customers in the US and UK. David holds a Bachelor’s Degree in Electronics and Communication Engineering and diverse certifications such as ITIL Foundations, Microsoft Certified Professional, Cisco CCNA, and Cisco CCIE R&S-written only.
We look forward to your participation. Please Share this event in your social channels.
Are you a Cisco customer or partner and have a technical question? Get answers before opening a TAC case by visiting the Cisco Support Community.
Hello Team, I have HA pairs of C9800-40-K9 in SSO.. both units are connected to primary and secondary core each on 40G fiber uplink. when I test failover it take forever to switch active to standby. As a work around, we were able to fix th...
Hello Dears, I have an interface on my ASR9K router with a duplicate IPV6 link-local address, and when I add the link-local address manually, the conflict doesn't disappear and the interface is still down. Bundle-Ether(x.x) is Up, ip...
\Hi Team, Is there a method to add an additional 10G link to an in-production 10 gig link to form a port channel. Nexus 3K switch is having BGP with one of the router over L3 port. We are advertising and receiving the routes via with EBGP.N...
I facing problem CPU load high in my 2960 switch. when check CPU load detail of my switch, found DAI process consume the most. I did restarted my switch but still same. when I do Wireshark packet capture, found a lot of ARP request to broadcast IP. Any pe...